KGCS166GSS08 KitchenAid Cooktop - Overview
Sections of the KGCS166GSS08
[Viewing 2 of 2]
Manuals & Care Guides for KGCS166GSS08
Click to downloadInstall
Installation Instructions
(1.94MB)
Manual
Owner's Manuals
(0.97MB)
Manual
Owner's Manuals
(2.21MB)
Keep searches simple, eg. "belt" or "pump".
Range Surface Burner Knob
PartSelect #: PS11740932
Manufacturer #: WP3191922
Sold individually. This knob accepts a D-shaped shaft.
$14.25
In Stock
Order within the next 12 hrs and your part ships today!
Range Torx Screw
PartSelect #: PS11741257
Manufacturer #: WP3368921
7-18 x 3/4-Inch - sold individually.
$8.82
In Stock
Order within the next 12 hrs and your part ships today!
Range Igniter Screw
PartSelect #: PS11745563
Manufacturer #: WP8273062
This screw is sold individually.
$10.09
In Stock
Order within the next 12 hrs and your part ships today!
Range Surface Ignitor
PartSelect #: PS11747432
Manufacturer #: WP9782116
Also known as Spark Electrode. This part helps your burner ignite and produce flame.
$61.24
In Stock
Order within the next 12 hrs and your part ships today!
Screw
PartSelect #: PS3651485
Manufacturer #: W10491985
Sold individually.
$10.20
In Stock
Order within the next 12 hrs and your part ships today!
Range Screw
PartSelect #: PS11742550
Manufacturer #: WP4449809
Follow appropriate safety practices when installing your range screw. Sold individually.
$10.62
In Stock
Order within the next 12 hrs and your part ships today!
Range Natural Gas To Liquid Propane Conversion Kit
PartSelect #: PS11740944
Manufacturer #: WP3192741
This kit allows you to convert your appliance from natural gas to liquid propane.
$54.14
In Stock
Order within the next 12 hrs and your part ships today!
Range Knob Bezel (Black)
PartSelect #: PS11742679
Manufacturer #: WP4457192
Must order knob separately by Model#.
$61.87
Special Order
Surface Burner Orifice Holder
PartSelect #: PS11749162
Manufacturer #: WPW10155786
Got a Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, or Magic Chef stove? You're in the right place. We can help you get your stove back to cooking evenly and efficiently with our authentic W...
$79.67
In Stock
Order within the next 12 hrs and your part ships today!
Range Burner Head 12k
PartSelect #: PS11754345
Manufacturer #: WPW10406797
This part distributes flame evenly to your cookware.
$66.57
In Stock
Order within the next 12 hrs and your part ships today!
Range Burner Head 6k
PartSelect #: PS11754341
Manufacturer #: WPW10406243
This is the Right Rear Burner Head.
$39.55
In Stock
Order within the next 12 hrs and your part ships today!
Range Igniter Switches w/Harness
PartSelect #: PS11742674
Manufacturer #: WP4456901
If your cooktop burners aren’t lighting or seem unpredictable, this spark ignition switch and harness assembly could be the fix. It includes five ignition switches and the wiring needed to get your bu...
$186.51
In Stock
Order within the next 12 hrs and your part ships today!
Questions And Answers for KGCS166GSS08
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the KGCS166GSS08
[Viewing 2 of 2]Gas igniter glows, but will not light
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
the knob was melted by a hot pan
popped off the old knobs and put on the new ones in less than a minute
Parts Used:
-
David from Corinth, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
21 of 25 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Igniter problem on one gas burner
I had to remove the two separate components of the gas burner unit, each had two screws. I lifted then tilted the lower portion of the burner unit to allow access to the underside of the igniter. I removed the wire and then with an offset screwdriver I removed the single screw that held the igniter in place. I reversed the steps to install the replacement, very quick fix.
I was also very pleased with how quickly the order was processed and the part was delivered, only three or four days with standard shipping.
I was also very pleased with how quickly the order was processed and the part was delivered, only three or four days with standard shipping.
Parts Used:
-
Roland from Houston, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
16 of 20 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I had a faulty wiring on the igniter switches.
replaced the set of igniter switches I order from Partselect .com.
Parts Used:
-
Raymundo from Cerritos, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
12 of 18 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!