This manufacturer-approved Refrigerator Pantry End Cap Kit, also known as the Refrigerator Drawer Support, is a kit containing all parts of the Pantry End Cap. It snaps into place on the appliance’s ...
This water filter purifies water going to the water dispenser and sometimes the icemaker as well. This part should be replaced if it is causing reduced water flow or just replaced periodically per the...
This OEM Center Rail is a white plastic part which supports the crisper frame, which holds the crisper. Fifteen inches long and white in colour, if broken, the support may no longer hold properly. Re...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
Keep your fridge’s pantry drawer sealed and fresh with this replacement lid! It’s made of sturdy white plastic and has a clear window so you can see what’s inside without opening it. This part helps c...
This water filter bypass cap is a genuine OEM component designed for select Whirlpool, Maytag, KitchenAid, and affiliated refrigerator models. Installed in place of the water filter, it allows uninter...
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
This light switch may also be known as a refrigerator door switch or a light switch kit, and is compatible with your refrigerator. The function of the refrigerator door switch is to turn on the light ...
This crisper drawer frame supports the drawer and the shelf above it, helping organize produce and maintain airflow for freshness. It features raised edges to contain spills and fits select Whirlpool ...
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Melissa
March 13, 2020
What are the dimensions of this fridge
For model number KFIS25XVMS00
Hello and thank you for writing.
Here are the specifications for your unit.
CABINET WIDTH
90.49 cm, 35-5/8 in
CAPACITY
21-47/50
CUTOUT HEIGHT
182.88 cm, 72.0 in
CUTOUT WIDTH
91.44 cm, 36.0 in
DEPTH
76.84 cm, 30-1/4 in
DEPTH CLOSED EXCLUDING HANDLES
70.48 cm, 27-3/4 in
DEPTH CLOSED INCLUDING HANDLES
76.84 cm, 30-1/4 in
DEPTH EXCLUDING DOORS
62.55 cm, 24-5/8 in
DEPTH WITH DOOR OPEN 90 DEGREE
112.08 cm, 44-1/8 in
FREEZER VOLUME
158.20 l, 5.59 cu. ft.
HEIGHT
182.88 cm, 72.0 in
HEIGHT TO TOP OF CABINET
181.29 cm, 71-3/8 in
HEIGHT TO TOP OF DOOR HINGE
182.88 cm, 72.0 in
REFRIGERATOR VOLUME
462.70 l, 16.35 cu. ft.
WIDTH
90.80 cm, 35-3/4 in
We hope this information helps. Please contact us anytime if you require further assistance.
Was this helpful?
Thank you for voting!
Sharon
September 10, 2025
Replacing light inside the fridge
For model number KFIS25XVMS00
Hi Sharon, thank you for contacting us. The light bulb for your model is part number PS17216393. We hope that helps!
Pressed in the end of the filter cover, lowered it down part way. Twisted the old filter 1/4 turn and removed it. Set in the sink to drain. Inserted new filter and twisted it to lock. closed cover. Done. Total time @ 1 Minute.
I knew the chances of all the freon leaking out was unlikely so I looked at the wiring to the compressor and there was a capacitor and a starter/overload so i figured I would start there. I went on line and found the parts at this site and they were less than the minimum service call charge for a service tech so I figured what the heck let's give her a shot so I did give it a shot. I ordered the parts and they were there in less time than a service tech could come out and i installed the parts and guess what for 90.00 in parts and 15 minutes in time I repaired my refrigerator. Thanks guys, It took less time to order the parts than it did to make the repair so thanks, your website rocks and is very well designed so my hat is off to you guys!
Removed the fruit & veggie drawers & the deli (pantry) drawer. Took out the 3 screws, removed the attached parts, put them on the replacement part, reattached it and put the drawers back in.
Here's the part I want to share: PartSelect had a expanded diagram showing the correct part and sufficiently detailed to figure out the repair before the part arrived. That's why I ordered from them. Secondly, I ordered the part Thursday morning--and the thing was sitting on my porch when I came back in from my evening out Saturday--2 days later!!!
