This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
This oven temperature sensor is designed to monitor and regulate the internal heat levels of your range, ensuring consistent and accurate cooking performance. It communicates directly with the control...
The light socket on your electric range connects the power source to the light bulb. If your oven light is malfunctioning, you may need to replace the light socket. The light socket is located in the ...
This oven bake igniter is for gas ovens with Direct Spark Ignition (DSI). It ignites the gas to light the bake burner. Before installation, turn off the house circuit breaker and gas supply. Wear glov...
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kathryne
October 31, 2023
The flame on all of the burners are too high. We set the flame to low and tried to lower the flames using a screwdriver, as per instructed. The flame will not adjust to the proper setting.
For model number KFGG504KPS0
Hello Kathryne, thank you for the question. We have found that the issue is with the valve and pressure regulator, part number PS11770096. It controls the gas supply for the burners and limits the incoming gas pressure to a safe and constant level. Glad to be of assistance!
Hello Beth, Thank you for the question. You will just need to turn the Knob to the Low setting to lower the flame. We hope this helps!
Was this helpful?
Thank you for voting!
Debbie
October 13, 2022
I have tried finding a surface protector for the top of my gas stove and haven't been able to find to. Will a stove guard for the top for model kfgg405kps0 work??
For model number KFGG504KPS0
Hello Debbie, thank you for contacting us. We have researched the model you have provided and have found that the part you are probably looking for is the burner cap, part number PS12745734. It protects the burner head from spills and helps spread out the burner flame for even heating. The set comes with caps for all the burners. If you would like assistance placing an order, please contact customer service. Good luck with your repair!
My conversion kit for natural to propane seems to not have the right amount of orifices. Are there others to order?
For model number kfgg504kps0
Hi Kate, thank you for reaching out. The complete LP conversion kit for the surface burners is part number PS16217992, and it includes five orifices. For the oven bake and broil burners, the correct LP conversion kit is part number PS12070661. We hope this helps.
I numbered every part. ex: 1 L., for first part removed left side. I used a magic marker to circle the holes and wrote the number of screws used on the part, set the srews in a separete place, so that I new where these screws went to. The cleanup was pretty time consuming, but I was able to keep my stove, when every repairman I called to fix my stove told me I was better off buying a new stove. ($600.00 stove 2 years old)Please Note: The insulation blanket needed for the entire stove is two pieces, the sides and top are one part # and the bottom and back, are another part #. I did not know this. I just purchased the top and sides. I got lucky, the back and bottom were still in good shape. So I guess I should have read the description of the part more carefully to see what it covers, before I ordered it. It took two people two hours to do the work, it was really nice to have an extra set of eyes, to remember what direction pieces of metal from the stove went. I would do it all over in a heart beat instead of buying a new stove.
Socket Lite come with clips attached to the outside of the housing. After you unhook the 3 lead wires that are attached to the unit. All you have to do is push in on the clips and release the unit. Then you snap in the new unit. Attach the 3 wire leads, put a oven bulb in the socket end, and the install the light cover
Removed oven from wall unit and took the back off. Removed the old socket assembly by depressing the ears and forcing unit into the oven. The electrical wires were easily removed since they are spade connections and slip off. They also are different sizes so that there is no chance of erroneously putting them back in an incorrect order. The new unit simply slips in from the front and snaps into place. The most difficult part of the entire process is removing the old unit. A little "friendly persuasion" is required to get the old unit out.
