This thermal fuse is a manufacturer-approved replacement part for your oven. It is common for the oven to lose power after completing a self-cleaning cycle, and the thermal fuse is often at fault. Rep...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
If your oven isn’t heating properly or seems to be getting too hot, the high-limit thermostat might be the issue. This part helps keep things safe by shutting off the heat if the temperature gets too ...
If your oven door glass is cracked or letting heat escape, this replacement panel can help restore performance and safety. It’s the inner glass you see when you open the oven, designed to handle high ...
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mark
January 13, 2020
Is the “blower” the same as the cooling fan in other ovens? Mine is squeaking and i replaced the convection motor/ fan already.
For model number KEBS109BSS01
Hello Mark, yes the Blower would be considered the cooling fan.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Dave
April 5, 2023
Getting a error code err f2e1 keyboard?
Tried powering down a few times and eventually comes back. The number 2 doesn’t work anymore. I think it’s the keyboard..
For model number KEBS109BSS01
Hello Dave, thank you for contacting us. Based on our research, there may be a problem with the user interface or keypad. To fix your issue, you may need to replace the control panel, part number PS8746528. The keypads come in a panel assembly. We hope this helps.
USE 2 PEOPLE FOR SAFETY! SWITCH OFF OVEN POWER BREAKER!! Remove screws attaching oven to wall opening, slide out entire oven just far enough to get to 2 screws on either side of controls, remove those screws (may need stubby screwdriver), lift control front, opens forward, have 2nd person hold control panel cover while removing centered thermal fuse (plugs on both ends, may need needle-nose pliers to grip plug on fuse.) Remove old fuse, plug in new one. Close control panel, replace side screws, TEST POWER BEFORE pushing oven back into wall, replace wall-holding screws. Less than 30 minutes. EXTRA PERSON MAKES EASY!
Not a repair. Just needed to replace the meat probe sensor for the programmable oven. Quick and easy purchase and very fast delivery took care of the problem. I was back in business.
