KBFS20EVMS13 KitchenAid Refrigerator - Overview
Sections of the KBFS20EVMS13
[Viewing 9 of 9]Manuals & Care Guides for KBFS20EVMS13
Click to downloadInstall
Installation Instructions
(2.25MB)
Manual
Owner's Manuals
(1.73MB)
Manual
Owner's Manuals
(7.5MB)
Keep searches simple, eg. "belt" or "pump".
Refrigerator Water Filter
PartSelect #: PS11722130
Manufacturer #: EDR4RXD1
This water filter purifies water going to the water dispenser and sometimes the icemaker as well. This part should be replaced if it is causing reduced water flow or just replaced periodically per the...
$49.99
In Stock
P-Trap Drain Tube Kit
PartSelect #: PS8691807
Manufacturer #: W10619951
Also known as a duck bill. This kit includes the tube extension piece and spacer.
$53.22
In Stock
Crisper Drawer
PartSelect #: PS11743502
Manufacturer #: WP67002659
The crisper drawer in your refrigerator is used for storing various items. If you notice that your current crisper drawer is damaged, you may need to replace it. You may notice that your refrigerator ...
$161.26
In Stock
Refrigerator Pantry End Cap
PartSelect #: PS11738568
Manufacturer #: WP12656018
This replacement end cap supports the pantry drawer on the right side of your refrigerator, helping it slide and stay in place properly. It mounts to the inside wall and is essential for keeping the d...
$60.77
In Stock
Refrigerator Ice Maker Assembly
PartSelect #: PS11765620
Manufacturer #: W10884390
This ice maker assembly is designed to produce and dispense ice efficiently within the freezer compartment of compatible refrigerator models. It includes a built-in shut-off arm and a wire harness for...
$159.43
In Stock
Refrigerator Pantry End Cap
PartSelect #: PS11738573
Manufacturer #: WP12656105
This left-side pantry end cap, also referred to as a drawer support or door shelf trim, is designed to secure items on the interior door shelf of your refrigerator. Sold individually, it snaps into pl...
$65.37
In Stock
Touch-Up Paint - White
PartSelect #: PS385132
Manufacturer #: 72017
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$15.95
In Stock
Refrigerator Pantry Drawer Lid
PartSelect #: PS11743650
Manufacturer #: WP67005930
Keep your fridge’s pantry drawer sealed and fresh with this replacement lid! It’s made of sturdy white plastic and has a clear window so you can see what’s inside without opening it. This part helps c...
$90.15
In Stock
Door Gasket - Gray
PartSelect #: PS11759515
Manufacturer #: W10830162
If your fridge door is sweating or hard to open and close, the gasket might need replacing. This gray magnetic gasket helps seal the door tightly to keep cold air in and warm air out. It runs along al...
$241.57
In Stock
Refrigerator Door Switch
PartSelect #: PS12728638
Manufacturer #: W11384469
Door switch turns the light off when you close the door.
$48.68
In Stock
Refrigerator Water Filter Bypass
PartSelect #: PS12731165
Manufacturer #: W11395888
This water filter bypass cap is a genuine OEM component designed for select Whirlpool, Maytag, KitchenAid, and affiliated refrigerator models. Installed in place of the water filter, it allows uninter...
$55.88
In Stock
Refrigerator Humidity Control Slide
PartSelect #: PS11743638
Manufacturer #: WP67005864
This part mounts on the crisper drawer cover and is used to limit the amount of air that gets into the crisper.
$14.69
In Stock
Questions And Answers for KBFS20EVMS13
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Julia
October 28, 2025
How can I order the refrigerator door seal ?
For model number KBFS20EVMS13
Hi Julia, thank you for your inquiry. The refrigerator door gasket, part number PS11759515, is compatible with your model number. If you are looking to purchase this part then you can do so by either adding it to your cart and going through the checkout process online. Glad to be of help!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Gary
December 7, 2022
The ice maker has stopped making ice, what might be the problem?
For model number KBFS20EVMS13
Hello Gary, thank you for contacting us. Please make sure the ice maker is receiving water uninterruptedly and the water inlet valve, part number PS11754529, is good and the filter, PS11722130, is not clogged. If that is not the case, the issue is probably related to the ice maker assembly, part number PS11765620. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.
Was this helpful?
Thank you for voting!
Related Parts:
Edward
January 23, 2025
Do you sell the water filter holder that is mounted on the inside top right of the refrigerator?
For model number KBFS20EVMS13
Hi Edward, Thank you for asking. The Filter Head for this model is listed as PartSelect #: PS12712109. Thank you for the inquiry, good luck with the repair!
Was this helpful?
Thank you for voting!
Related Parts:
James
August 10, 2021
I have a kitchen aid refrigerator that has a broken drawer guide that holds the pantry lid. The "knob/notch" that holds the pantry lid is broken on the left side as I am looking at the fridge. **it's the side that does not have the pantry chill control slide on it** should I get a right side or left side drawer guide?
For model number KBFS20EVMS13
Hello James, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11738573. The sides are determined by standing in front of the appliance looking at the appliance. It is your left or right side. We hope this helps!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
Common Symptoms of the KBFS20EVMS13
[Viewing 21 of 21]Light not working
Fixed by
these parts
these parts
Show All
Leaking
Fixed by
these parts
these parts
Show All
Door won’t open or close
Fixed by
these parts
these parts
Show All
Ice maker not making ice
Fixed by
these parts
these parts
Show All
Not dispensing water
Fixed by
these parts
these parts
Show All
Noisy
Fixed by
these parts
these parts
Show All
Fridge too warm
Fixed by
these parts
these parts
Show All
Ice maker won’t dispense ice
Fixed by
these parts
these parts
Show All
Frost buildup
Fixed by
these parts
these parts
Show All
Door Sweating
Fixed by
these parts
these parts
Show All
Freezer not defrosting
Fixed by
these parts
these parts
Show All
Fridge too cold
Fixed by
these parts
these parts
Show All
Fridge and Freezer are too warm
Fixed by
these parts
these parts
Show All
Clicking sound
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Ice maker dispenses too little ice
Fixed by
these parts
these parts
Show All
Freezer section too warm
Fixed by
these parts
these parts
Show All
Ice maker dispenses too much ice
Fixed by
these parts
these parts
Show All
Too warm
Fixed by
these parts
these parts
Show All
Won’t start
Fixed by
these parts
these parts
Show All
Touchpad does not respond
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
light on to order water filter
Pressed in the end of the filter cover, lowered it down part way. Twisted the old filter 1/4 turn and removed it. Set in the sink to drain. Inserted new filter and twisted it to lock. closed cover. Done. Total time @ 1 Minute.
Parts Used:
-
Douglas from Byron, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
915 of 1051 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Removing the existing filter by rotating as directed and then dislodging from 'docking' station proved difficult. Turns out, the old filter is under a bit of vacuum pressure and getting the unit to separate or release was a challenge.
I removed the drop-down outer housing by gently prying the sides of the two pivot pins at the rear. This gave me move 'room' to grip and slightly rotate then pull the old filter forward and away from the tight suction connection. I was concerned that I would be too forceful for the plastic assemblies and would break something; deliberate motions and a steady thought process on the problem helped disengage the darned old filter!
Parts Used:
-
Jake from Novato, CA
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
214 of 333 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken pins holding pantry door
Removed door and crisper pans.
Removed nuts on left end cap - think there were 3.
Removed nuts on right end cap and one or two on back air regulator attached to right end cap.
Replaced left end cap with new one using reserved nuts.
Carefully removed back air regulator from right end cap.
Attached back air regulator to new right end cap.
Replaced right end cap and back air regulator and attached with nuts.
Carefully inserted pantry door into pin on one side and slightly bent both right and left pins to insert door fully into end caps.
Replaced crisper pans.
That's it.
Removed nuts on left end cap - think there were 3.
Removed nuts on right end cap and one or two on back air regulator attached to right end cap.
Replaced left end cap with new one using reserved nuts.
Carefully removed back air regulator from right end cap.
Attached back air regulator to new right end cap.
Replaced right end cap and back air regulator and attached with nuts.
Carefully inserted pantry door into pin on one side and slightly bent both right and left pins to insert door fully into end caps.
Replaced crisper pans.
That's it.
Parts Used:
-
Gregory from Bethesda, MD
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
149 of 169 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!