This water filter purifies water going to the water dispenser and sometimes the icemaker as well. This part should be replaced if it is causing reduced water flow or just replaced periodically per the...
$49.99
In Stock
Order within the next 4 hrs and your part ships today!
The crisper drawer in your refrigerator is used for storing various items. If you notice that your current crisper drawer is damaged, you may need to replace it. You may notice that your refrigerator ...
$152.80
In Stock
Order within the next 4 hrs and your part ships today!
This replacement end cap supports the pantry drawer on the right side of your refrigerator, helping it slide and stay in place properly. It mounts to the inside wall and is essential for keeping the d...
$58.16
In Stock
Order within the next 4 hrs and your part ships today!
The pantry drawer lid helps keep everything inside the drawer, it acts as a cover and keeps your drawer at the proper temperature by creating a seal. If the door will not open or close, or if the draw...
$182.02
In Stock
Order within the next 4 hrs and your part ships today!
This ice maker assembly is designed to produce and dispense ice efficiently within the freezer compartment of compatible refrigerator models. It includes a built-in shut-off arm and a wire harness for...
$133.72
In Stock
Order within the next 4 hrs and your part ships today!
This left-side pantry end cap, also referred to as a drawer support or door shelf trim, is designed to secure items on the interior door shelf of your refrigerator. Sold individually, it snaps into pl...
$62.55
In Stock
Order within the next 4 hrs and your part ships today!
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$15.95
In Stock
Order within the next 4 hrs and your part ships today!
If your fridge door is sweating or hard to open and close, the gasket might need replacing. This gray magnetic gasket helps seal the door tightly to keep cold air in and warm air out. It runs along al...
$219.46
In Stock
Order within the next 4 hrs and your part ships today!
This water filter bypass cap is a genuine OEM component designed for select Whirlpool, Maytag, KitchenAid, and affiliated refrigerator models. Installed in place of the water filter, it allows uninter...
$55.88
In Stock
Order within the next 4 hrs and your part ships today!
Running out of space in your fridge door? This clear, shallow bin is perfect for organizing jars, bottles, and small items. It’s made from sturdy plastic and fits right into the door—no tools needed. ...
$76.94
In Stock
Order within the next 4 hrs and your part ships today!
Questions And Answers for KBFS20ECMS00
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jean
December 8, 2023
savoir J'aimerais savoir pourquoi l'eau coule du filtre à eau en arrière de celui-ci ou l'eau arrive. Comment réparer et j’aimerais avoir une vidéo pour la réparation s.v.p.
For model number KBFS20ECMS00
Bonjour Jean, Merci d'avoir écrit. Si vous voulez dire que de l'eau s'échappe de la tête de filtre qui maintient le filtre, le tuyau pourrait s'être détaché de la tête ou la tête de filtre est endommagée. Assurez-vous également que le filtre est changé tous les 6 mois. Nous espérons que cela vous aidera !
Hello Edmond, thank you for contacting us. The evaporator fan blade for your model is part number PS11738973. If you need help placing an order, customer service is open 7 days a week!
The metal bar on off switch for the ice maker (which is not connected to water) became bent and broke off. The fridge is very noisy on the left side. If the ice maker is stuck on, would that cause the excessive noise, and if so, can the one/off handle be replaced?
For model number KBFS20ECMS00
Hello Sharon, thank you for your question. Yes, the excessive noise is probably from the icemaker. The bar is available to order, which is Part #: PS11755849. The part that the bar activates inside the icemaker might be broken as well, so if the bar is replaced and the icemaker will not shut off still, the icemaker should be replaced. I hope this helps.
Was this helpful?
Thank you for voting!
Sharon
January 27, 2020
What part # is the ice maker unit? I revived a reply already regarding a broken on/off ice maker handle which stated inside the unit could be broken (if replacing handle doesn’t solve noise issue), but it did not include the part # for the ice making unit. Also where are the parts available to purchase? Thanks so much.
For model number KBFS20ECMS00
Hello Sharon, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11765620 for the Ice Maker. You can enter the part number into the website and there will be a add to cart button to proceed with the order and choose your shipping method. You can pay with Credit card or PayPal on the site. We hope this helps.
Where can i buy replacement pouches for keep fresh packet for produce drawer in fridge? Live in aurora, ontario, canada part w10614431a
For model number KBFS20ECMS00
Hi Gary,
Thank you for your question. We do sell the produce preserver filter for refrigerator crisper drawers.
The part number listed under your model number for the produce preserver filter is PS3503014. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
Pressed in the end of the filter cover, lowered it down part way. Twisted the old filter 1/4 turn and removed it. Set in the sink to drain. Inserted new filter and twisted it to lock. closed cover. Done. Total time @ 1 Minute.
I removed the drop-down outer housing by gently prying the sides of the two pivot pins at the rear. This gave me move 'room' to grip and slightly rotate then pull the old filter forward and away from the tight suction connection. I was concerned that I would be too forceful for the plastic assemblies and would break something; deliberate motions and a steady thought process on the problem helped disengage the darned old filter!
Removed door and crisper pans. Removed nuts on left end cap - think there were 3. Removed nuts on right end cap and one or two on back air regulator attached to right end cap. Replaced left end cap with new one using reserved nuts. Carefully removed back air regulator from right end cap. Attached back air regulator to new right end cap. Replaced right end cap and back air regulator and attached with nuts. Carefully inserted pantry door into pin on one side and slightly bent both right and left pins to insert door fully into end caps. Replaced crisper pans. That's it.
