All Installation Instructions for General Electric Range JX81A

Replace Charcoal Filter

Philips head screwdriver to remove 2 screws holding plastic grill above microwave door in place. Old Filter lifts out slide new filter in. It rests on an angle. Re insert Grill (careful that plastic tabs slide into proper slots). Tighten SCrews

Parts Used:

Charcoal Filter

Stuart from North Port, NY
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

33 of 49 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Grill for exhaust was broken.

Ordered a replacement grill, replaced the optional charcoal filter at the same time. Took just a little effort to get the alignment tabs in place--required just a little more elbow grease than you'd think, then replaced the two screws.

Parts Used:

Charcoal Filter

David from Lafayette, CO
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

5 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

We couldn't install it - received wrong part.

The filter we have is 6x4. I ordered by phone.They sent the wrong part - 6x11.
We returned it to Post Office at our own cost - $8.85 May26. Tracked - it arrived May 28. So far we do not have the correct filter. We are waiting for the refund. Charged $49.99 plus tax & shipping of $7.75.
Thank you for helping us get the correct filter and a refund. We should not be charged for returning the wrong part they sent us by mistake.
Marilyn Tostado

Parts Used:

Charcoal Filter

MARILYN from SOLANA BEACH, CA
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

filter in fan over stove had not been replaced since we bought this place.

My husband simply unscrewed the front of the vent, pulled out the old filter and slid the new one in. After cover was washed and dried, he screwed the cover back on and Voila!The vent fan is much quieter now and it clears the air quickly when it is in use.

Parts Used:

Charcoal Filter

Linda P. from Naples, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

needed to replace charcol filter

followed the easily understood step by step instructions from the owner's manual

Parts Used:

Charcoal Filter

JOHN from MADISON, WI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Filter old, needed replacement

Remove 2 screws, remove cover, remove filter, reverse proceedure.

Parts Used:

Charcoal Filter

Richard from Carson City, NV
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Normal maimtemance

very ease

Parts Used:

Charcoal Filter

John from Brockton, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

dirty rotted filter

great correct part thanks

Parts Used:

Charcoal Filter

Kenneth from Riverhead, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Charcoal filter needed replaced

Took out the 2 screws holding the front grill on. Took out the old filter and put in the new one. Then put the grill back on...DONE!!!

Parts Used:

Charcoal Filter

Carol from Bethel Park, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Top Brands

Top Product Types

JX81A General Electric Range - Instructions