You can always rely on our GE Halogen Lamp to keep your appliance shining bright. This high-performance halogen lamp was made by GE, specifically for your appliance. Wondering why its such a critical ...
This ceramic microwave fuse is just over an inch in length. It is white in the center, and metal on both ends. This is a 20-amp fuse, and is used to power your microwave. If the touch pad on the micro...
If your oven isn’t heating right or the temperature keeps changing, this sensor could be the problem. It helps your oven stay at the right temperature by sending signals to the control board. When it’...
If your microwave won’t start even though the door is shut, this switch might be the reason. It helps your microwave know the door is closed so it can run safely. This genuine part is easy to install ...
Need better lighting inside your oven? This halogen bulb gives off a warm, clear light so you can easily check on your food while it cooks. It’s made to handle high heat and fits into the top of the o...
Looking for a reliable solution to ensure your microwave works safely and efficiently again? The GE Microwave Thermostat is what you need. It plays a crucial role in preventing any overheating, which ...
This part is a replacement screw for your oven. It is made of black metal and is sold individually. This screw is approximately 1/4 inch in diameter and about 1/2 inch in length. It is designed to con...
This diode cable is a replacement electrical component designed to regulate current flow within an appliance circuit. It helps protect sensitive components and is commonly replaced when electrical fau...
Maintain safe and consistent oven performance with this genuine cooling fan sensor board. This electronic component monitors the cooling fan’s speed and communicates with the main control board to pre...
This capacitor delivers the electrical boost required for motors to start and operate efficiently. Proper capacitance reduces strain on motor components and helps prevent startup failures or inconsist...
This tray rotates in your microwave ensuring more even temperatures.
No Longer Available
Questions And Answers for JT3800SH3SS
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Alicia
March 14, 2024
the control panel says lower over cooling fan error service may be needed
For model number JT3800SH3SS
Hello Alicia, thank you for getting in touch. Based on our understanding of the issue, we would suggest checking the blower motor assembly, part number PS12702967, to solve the problem. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Mo
December 30, 2019
Microwave won't heat. How do i fix it?
For model number JT3800SH3SS
Hello Mo and thank you for writing.
It certainly sounds like a faulty line fuse PS239525 and/or diode cable PS239148, you should check for signs of damage, and replace it if needed. We hope this helps. Please contact us anytime.
I recently did a self-clean and when it finished it said service needed the fan, I guess didn't cool it off. so, doors stayed locked and so I turn breaker off to house and turned back on and unlocked door. microwave still works but the oven shows preheating but won't get hot."
MODEL # jt3800sh3ss
For model number JT3800SH3SS
Hi Delia, thank you for reaching out. According to our research, you may need to check the following parts to fix the issue: bake element kit, part number PS11729137, and oven temperature sensor, part number PS8754411. If the issue persists, then you may need to replace the control board, part number PS12722613. We hope this sorts out your problem!
on the microwave the inside top is a gray cover that came off while i was cleaning inside it, It has a long slit opening on it and on the sides it has 2 tabs to hold it in that came off. i would like to replace it
For model number JT3800SH3SS
Hi Elaine, thank you for reaching out. The canopy mica you are looking for is part number PS1017735. We hope that helps!
Turned out the issue was easily solved by replacing a single, inexpensive fuse.
First off, UNPLUG THE MICROWAVE.
The fuse is located under the plastic grill at the top of the microwave. It's held on by two screws. Once you've removed the screws and taken off the plastic grill, you go to the right side of the microwave and remove another screw that holds a small metal grill in place. Removing the small metal grill is probably the toughest part of this repair. You kind of have to rock it back and forth a bit to get it to release. Once that's off, you can get to the fuse. I removed the burnt out one with a pair of needle nose pliers. I also put a small piece of cardboard under the fuse when I did this so I didn't accidentally drop it into the innards of the microwave. I did the same thing when I replaced the new fuse. I then plugged the appliance back in and made sure it worked. Once that was confirmed, I replaced both grills.
First I disconnected the power and opened the door. Then I removed the top screws holding the top vent louvers, then removed the screw at the top of the touch pad. The touch pad removes by sliding up slightly then tilting top out. I unscrewed two screws holding the door latch assembly. Press the tab to remove and replace switch. Reconnect wires, reseat latch mount by placing top bracket tab in place first, allign and secure with screws. Reseat touch pad by placing bottom tabs in first, tilt forward and press up to seat top tabs, secure with top screw. Secure vent louver screws, plug in and watch your microwave work again.
