This advanced refrigerator water filter utilizes Triple Filtration Technology to reduce a wide range of contaminants, including mercury, lead, and trace pharmaceuticals, ensuring cleaner and safer wat...
If your refrigerator or freezer is too warm, or making noises, you may need to replace the fan blade. The fan blade attaches to the evaporator motor, which is in the freezer section, to help circulate...
The body of this evaporator fan motor has four wires extending from the body, blue, red, yellow and one white one. This evaporator fan motor is located in the back of the freezer, and circulates air o...
This condenser fan blade is a replacement airflow component designed to move air efficiently across cooling coils. It helps regulate temperature and maintain proper system performance and is commonly ...
We know how important it is to keep your fridge running smoothly. That's why we recommend the Whirlpool Power Disconnect Switch. This genuine OEM part is a real lifesaver when it comes to maintaining ...
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jim
November 15, 2024
Do you sell individual LED lights?
I only need 2 of them. All your pics show multiple lights.
Thank you.
For model number JS42NXFXDE01
Hello Jim, Thank you for reaching out. Very sorry, Jenn-Air only sells the LED Lights as a Kit, PartSelect #: PS17216452. Thank you for the inquiry!
Lefthand side door is loose from bottom. How to tighten it?
For model number JS42NXFXDE01
Hi Dhanraj, thank you for your inquiry. Open the door and inspect the hinges, particularly the bottom one, for any loose screws. Also, check the door alignment, if the door is not aligned properly, it will feel loose. Remove the bottom door trim, and tighten all the screws on the door assembly. Glad to be of help!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
First I shut the water off to the refrigerator.then i pushed the big button in the middle of the grille below the refrigerator door. pulled out the old filter, took the front cap off the old filter put it on the new filter. took the two red caps off the new filter. pushed the filter in till it locked in place. all done! Turned the back on.
It's simple enough in theory: read the side of the box and follow the instructions. BUT you need to really push the knob in pretty hard (I am a girl, and my hand strength isn't that good). If you don't, when you turn the knob, the filter won't come out, then it's tougher. So: make sure the knob pops before you turn!
