JP5036SJ2SS General Electric Cooktop - Overview
Sections of the JP5036SJ2SS
[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Triple Haliant Element - 12 Inch
PartSelect #: PS2321560
Manufacturer #: WB30T10126
If your cooktop burner isn’t heating up, this 12-inch haliant surface element might be the fix. It sits under the glass top and provides the heat for your cooking surface. You’ll need to unplug the ra...
$280.49
Special Order
Radiant Element - 6 Inch
PartSelect #: PS2321563
Manufacturer #: WB30T10129
Need to replace a burner on your smooth-top stove? This 6-inch heating element sits under the glass surface and heats up your cooking area evenly. It runs at 1500 watts and 240 volts, giving you relia...
$105.69
Special Order
Element Radiant 5.5 IN
PartSelect #: PS2370248
Manufacturer #: WB30T10145
This electric range surface element is designed to deliver consistent heat to a designated cooking zone, making it ideal for everyday meal preparation. Located beneath the cooktop, it plays a key role...
$159.55
Special Order
Haliant Element
PartSelect #: PS2321565
Manufacturer #: WB30T10131
Restore fast, even heating to your smooth-top range with this genuine radiant surface element. Measuring 8 inches in diameter, it uses advanced halogen technology to deliver quick, uniform heat for pr...
$185.87
Special Order
INSTALLATION KIT
PartSelect #: PS11729074
Manufacturer #: WB01X24570
Need a quick solution to get your kitchen range up and running again? This GE installation kit is here for you. Crafted to specifically fit your kitchen range like a glove, this kit comes packed with ...
$83.18
Special Order
Questions And Answers for JP5036SJ2SS
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the JP5036SJ2SS
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
9in portion of heating element inoperable
first ,troubleshot switch--it was ok. next,troubleshot triple element & found that the 9in portion had an open in the heating element itself ordered .new element,installed it .Works like new!
Parts Used:
-
John from LEWES, DE
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers
20 of 28 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Center Burner of a triple element wasn't working
Been procrastinating putting in the new element but decided to do it yesterday even if it meant eating breakfast out. Twenty minutes after starting , breakfast was cooking, at home on the new element. Two screws out, switch wires, snap on retainers, replace two screws and you're done!
Parts Used:
-
Richard from WOODLAND, WA
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
10 of 13 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Needed to replace 12 in heating element
Took a picture of the old heating element to make sure that when I replaced the new element the wires were in the exact location as before.
Parts Used:
-
Steve from ELMONT, NY
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers, Socket set
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!