JGC1430ADB14 Jenn-Air Cooktop - Overview

Sections of the JGC1430ADB14

[Viewing 3 of 3]
Keep searches simple, eg. "belt" or "pump".
Range Torx Screw – Part Number: WP3368921
Range Torx Screw
★★★★★
★★★★★
(3)
PartSelect #: PS11741257
Manufacturer #: WP3368921
7-18 x 3/4-Inch - sold individually.
$8.82
  In Stock
Dryer Screw – Part Number: WP90767
Dryer Screw
PartSelect #: PS11746840
Manufacturer #: WP90767
This screw is sold individually.
$10.09
  In Stock
Burner Cap – Part Number: WP8284669
Burner Cap
★★★★★
★★★★★
(1)
PartSelect #: PS11745641
Manufacturer #: WP8284669
Burner Cap - 6000 BTU Sold individually.
$69.86
  In Stock
Burner Cap Medium – Part Number: WP74007749
Burner Cap Medium
PartSelect #: PS11744195
Manufacturer #: WP74007749
$86.96
  Special Order
Burner Head - 16K – Part Number: WPW10406878
Burner Head - 16K
★★★★★
★★★★★
(4)
PartSelect #: PS11754347
Manufacturer #: WPW10406878
This part distributes flame evenly to your cookware.
$73.04
  In Stock
REGULATOR – Part Number: W11087445
REGULATOR
PartSelect #: PS12070643
Manufacturer #: W11087445
Having trouble with your Whirlpool cooktop? Don't worry ? we've got just the cure for you ? the powerful Whirlpool REGULATOR. Designed to help your cooktop operate at its peak, this part ensures an ef...
$238.99
  In Stock
Range Burner Head 12k – Part Number: WPW10406797
Range Burner Head 12k
PartSelect #: PS11754345
Manufacturer #: WPW10406797
This part distributes flame evenly to your cookware.
$66.57
  In Stock
Range Burner Head 6k – Part Number: WPW10406243
Range Burner Head 6k
PartSelect #: PS11754341
Manufacturer #: WPW10406243
This is the Right Rear Burner Head.
$38.83
  In Stock
Range Grommet – Part Number: WP74007705
Range Grommet
PartSelect #: PS11744194
Manufacturer #: WP74007705
This part is the replacement grommet for your cooktop or range. It is made of black plastic and is approximately 1 ¼ inches in diameter. This part may also be known as the cooktop burner knob gasket, ...
$11.57
  In Stock
Orifice Holder with Spark Igniter - Right Front – Part Number: WP7527P028-60
Orifice Holder with Spark Igniter - Right Front
★★★★★
★★★★★
(1)
PartSelect #: PS11744613
Manufacturer #: WP7527P028-60
Are you frustrated with your faulty Whirlpool appliance? The answer to your problem might just be the Orifice Holder with Spark Igniter. As a genuing OEM product, it's designed to enhance the performa...
$87.67
  In Stock
Spark Module – Part Number: WP7431P064-60
Spark Module
PartSelect #: PS11744538
Manufacturer #: WP7431P064-60
$286.03
  Special Order
KIT. LP CO – Part Number: 7509P173-60
KIT. LP CO
PartSelect #: PS2090324
Manufacturer #: 7509P173-60
$104.49
  Special Order

Questions And Answers for JGC1430ADB14

Be the first to ask our experts a question about this model!

Common Symptoms of the JGC1430ADB14

[Viewing 2 of 2]
Gas igniter glows, but will not light
Fixed by
these parts
Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Head burner had something spilled on it which stained it and left a large dark brown spot
Simply remove two screws take old one off and line up and put new one on and replace the two screws. Couldn't have been easier.
Parts Used:
Burner Head - 16K
  • Donald from Hudsonville, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
6 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I lost the cap
after I received the cap in the mail, I removed the grillwork and set the cap in place. then replaced the grill and my wife fixed my supper.
Parts Used:
Burner Cap Medium
  • Bill from Rochester, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
new countertops required remounting the gas cooktop
A very simple repair.
I inserted the brackets and screwed them in position
Parts Used:
Mounting Bracket Screw
  • Raymond from Allen, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
1 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!