JGBP24GEJA General Electric Range - Overview

Sections of the JGBP24GEJA

[Viewing 4 of 4]
Keep searches simple, eg. "belt" or "pump".
Flat Style Oven Igniter with Wire Harness and Bracket – Part Number: WB2X10016
Flat Style Oven Igniter with Wire Harness and Bracket
PartSelect #: PS241804
Manufacturer #: WB2X10016
This igniter is lighted by the spark switch to produce a flame to ignite the oven.
$242.37
  Special Order
USE GEH WB1X933 – Part Number: WB01X0933
USE GEH WB1X933
PartSelect #: PS222330
Manufacturer #: WB01X0933
  No Longer Available
USE GEH WB1X787 – Part Number: WB01X0787
USE GEH WB1X787
PartSelect #: PS222295
Manufacturer #: WB01X0787
  No Longer Available
USE GEH WB1X694 – Part Number: WB01X0694
USE GEH WB1X694
PartSelect #: PS222269
Manufacturer #: WB01X0694
  No Longer Available
USE GEH WB1X711 – Part Number: WB01X0711
USE GEH WB1X711
PartSelect #: PS222278
Manufacturer #: WB01X0711
  No Longer Available
USE GEH WB1X925 – Part Number: WB01X0925
USE GEH WB1X925
PartSelect #: PS222325
Manufacturer #: WB01X0925
  No Longer Available
USE GEH WB2X4743 – Part Number: WB02X4743
USE GEH WB2X4743
PartSelect #: PS224434
Manufacturer #: WB02X4743
  No Longer Available
MANIFOLD – Part Number: WB02X4749
MANIFOLD
PartSelect #: PS224438
Manufacturer #: WB02X4749
  No Longer Available
RETAINER – Part Number: WB02X4946
RETAINER
PartSelect #: PS224496
Manufacturer #: WB02X4946
  No Longer Available
USE GEH WB2X4753 – Part Number: WB02X4753
USE GEH WB2X4753
PartSelect #: PS224442
Manufacturer #: WB02X4753
  No Longer Available
USE GEH WB2X4391 – Part Number: WB02X4391
USE GEH WB2X4391
PartSelect #: PS224377
Manufacturer #: WB02X4391
  No Longer Available
USE GEH WB1X941 – Part Number: WB01X0941
USE GEH WB1X941
PartSelect #: PS222332
Manufacturer #: WB01X0941
  No Longer Available

Questions And Answers for JGBP24GEJA

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the JGBP24GEJA

[Viewing 1 of 1]
Gas igniter glows, but will not light
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
oven not up to temperature; shuts off before temp set
Took amp reading, which was 2.5 amps, that identified that the igniter needed to be replaced, for the safety valve requires 3.2 amps or better. Replaced, and everything is okay.
Parts Used:
Flat Style Oven Igniter with Wire Harness and Bracket
  • Maurice from Overland Park, KS
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
8 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Igniter
No problem getting to igniter in oven to remove from holder. Difficult to disconnect igniter at rear after removing drawer. Just hard to get to. Broke one of the plug-in receivers so had to crimp on a new one. This was a hinged pair that received the igniter lead and another lead that went to another part.
Parts Used:
Flat Style Oven Igniter with Wire Harness and Bracket
  • GENE from HEBRON, OH
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven Igniter DEAD
First wrote a wiring diagram then disconnected old igniter by removing two screws and unplugging.
Then just reversed the whole operation.
However, it never worked because the "oven/broiler" switch broke.
Its time for a new stove.
But I would recommend PartsSelect to anybody.
Your selection is great, you shipped as promised, and the best part was the price.
Parts Used:
Flat Style Oven Igniter with Wire Harness and Bracket
  • Steve from Flanders, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!