This surface burner switch is an essential component for electric ranges, controlling the power and heat level of the left front burner. It regulates the temperature by cycling the burner on and off t...
Got a Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, or Magic Chef stove, oven, or range? If it has lost its spark recently, it might be time to consider a new Surface Element Switch. This ge...
This black grease filter helps keep your cooktop’s vent system clean by trapping grease from the exhaust air. It’s easy to install—no tools needed—and protects the blower from buildup. If your current...
If one of your cooktop burners isn’t heating right—or not at all—this 1300-watt radiant element could be the fix. It’s the part that delivers heat to a smooth-top cooking surface and is a direct repla...
Need a fix for your Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis or Magic Chef stove? The Whirlpool Radiant Surface Element with Limiter might be just what you need! This vital replacement p...
If one of your stove burners isn’t heating properly, this radiant surface element could be the fix. It heats up evenly to help cook your food just right and fits on the top of your range. Built to las...
Struggling with a Whirlpool stove, oven, or range that's not heating just right? You probably need a new Right Rear Burner Switch. This small but mighty component gives you full control over the surfa...
Took 2 screws under front edge of smooth top. Unscrewed ground wire from back of smooth top unit. Unplugged 2 wire bundles, from back. Took bad element out , put in new one. Put back together. About 10 min's tops. Easy peasy.
really easy! Removed 2 screws under the glass top at the front, access from the open oven door, then removed the ground wire, removed the stove top, took the element holder off,( 2 screws)and replaced with new element, 30 minutes. I ordered the part and came within 18 hrs of ordering it, fantastic experience.
Remove top by opening oven and taking out two screws in the front. Lift up top and unplug wire connectors on bad element, writing down where they are landed. Take out screw on element bracket and replace. That easy. Be sure to unplug appliance for your safety. :-) Also just wanted to add that PartSelect was great. Ordered it on saturday and was cooking with it on tuesday. Great job.
![](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/12348164-1-S-Whirlpool-W11171119-6-amp-quot-Surface-Element-1200-W.jpg "6" Surface Element, 1200 W – Part Number: W11171119")