Your appliance deserves the best and that's just what you get with the Whirlpool Dual Infinite Switch. This isn't just any part, it's a highly-efficient, manufacturer-approved component designed to ke...
If one of your cooktop burners isn’t heating right—or not at all—this 1300-watt radiant element could be the fix. It’s the part that delivers heat to a smooth-top cooking surface and is a direct repla...
Whether you're cooking with a small pan or a large pot, this dual radiant element gives you the flexibility you need. It heats up fast and offers two power levels—1200 and 2500 watts—so you can match ...
If one of your stove burners isn’t heating properly, this radiant surface element could be the fix. It heats up evenly to help cook your food just right and fits on the top of your range. Built to las...
This surface element infinite switch controls the heat output of an electric cooktop burner by cycling power on and off to maintain the temperature you select, allowing smooth adjustment from a low si...
This surface element switch regulates heat levels by controlling power to the cooking element. Designed for smooth adjustment and consistent performance, it is replaced when burners fail to heat prope...
Slide range out to access rear. Turn off circuit breaker and/or unplug stove. I did both. Removed four screws on top section on rear of range and CAREFULLY slid out the back plate. Disconnected all wires and plugs from old switch noting locations. Placed wires and plugs on new switch. Removed knob and then two screws from front of old switch. Carefully placed new switch in proper location and screwed in the two front screws. CAREFULLY place the back plate in proper location and reattach with four screws. Clean floor and cabinet sides while range is out. Plug in range and/or turn on circuit breaker. Test switch operation and verify Cooking Surface On light only lights when switches are on. Slide range back into place.
