This is a heating element compatible with various makes of ranges and ovens and is sold as an individual part. Measuring 20.5-inches wide and 20.25-inches (with terminals) long, this heating element i...
This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are mos...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
If your oven’s control panel is getting too hot or showing fan errors, this cooling fan might be the fix. It helps keep the electronics cool by circulating air behind the panel, which can prevent over...
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
This oven temperature sensor is designed to monitor and regulate the internal heat levels of your range, ensuring consistent and accurate cooking performance. It communicates directly with the control...
The light socket on your electric range connects the power source to the light bulb. If your oven light is malfunctioning, you may need to replace the light socket. The light socket is located in the ...
Use this scraper for your ceramic/glass cooktop. It has a retractable blade and is an all-purpose tool for cooktops, mirrors, windows and tile. Use it to also remove paint, paper, dirt, stickers and more.
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
R.
January 22, 2020
No power to range or oven complete stove has no power
For model number JDS1750FS0
Hello, Thank you for your question. Here are a few things to check. Verify that the plug is firmly in the outlet. Check the circuit breaker. If it has two breakers, make sure neither one tripped. If the house has fuses instead of circuit breakers, check the fuse making sure it is not blown.We hope this helps.
Was this helpful?
Thank you for voting!
Mike
October 14, 2022
Bake icon on central panel doesn’t work. Can’t turn on oven
For model number JDS1750FS0
Hello Mike, thank you for your question. We would recommend checking the bake element and safety thermostat for continuity using a multimeter. If these are good, the problem is probably related to the control panel (black), part number PS11775215. If you need the stainless panel, that would be part number PS12070379. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.
Jenn Air JDS1750FS Temperature probe is probably bad. Do you have the part?
Am I correct in the belief that i will have to pull stove away from wall and remove a panel to access the removal of the probe?
For model number JDS1750FS0
Hello Andy, thank you for your question. Oven temperature sensor PS11726314 are very easy to replace. The sensor is located inside the oven at the top left or right hand side of the interior. Locate the sensor, then follow these instructions. I hope this helps! Step 1: Shut off power to the oven. ... Step 2: Remove the mounting screws. ... Step 3: Access the wire connector. ... Step 4: Disconnect the wire harness. ... Step 5: Install the new temperature sensor probe. ... Step 6: Restore power. We hope this helps.
i AM BEING TOLD THAT THE FAN MOTER ON MY MODEL JDS1750FSO HAS TO BE REPLACED. HOWEVER, I AM ALSO BEING TOLD THAT THE PART MAY NO LONGER BE AVAILABLE. CAN THAT BE THE CASE? THE APPLIANCE IS LESS THAN 5 YEARS OLD!
For model number JDS1750FS0
Hello Thomas, thank you for reaching out. The cooling fan motor for your model is part number PS12347171, and the vent fan motor is part number PS11770168. We hope this helps!
I numbered every part. ex: 1 L., for first part removed left side. I used a magic marker to circle the holes and wrote the number of screws used on the part, set the srews in a separete place, so that I new where these screws went to. The cleanup was pretty time consuming, but I was able to keep my stove, when every repairman I called to fix my stove told me I was better off buying a new stove. ($600.00 stove 2 years old)Please Note: The insulation blanket needed for the entire stove is two pieces, the sides and top are one part # and the bottom and back, are another part #. I did not know this. I just purchased the top and sides. I got lucky, the back and bottom were still in good shape. So I guess I should have read the description of the part more carefully to see what it covers, before I ordered it. It took two people two hours to do the work, it was really nice to have an extra set of eyes, to remember what direction pieces of metal from the stove went. I would do it all over in a heart beat instead of buying a new stove.
First, we turned on broil and the upper element turned orange and obviously worked. We figured the bottom element went out. The diagram on this site showed a bottom heating element that looked nothing like ours, but after reading other reviews, and reading that part that goes through the back of the oven was in the middle, and not off to the side, we ordered this element. It was perfect. All you have to do is unplug the oven, take out the bottom pan covering the element by removing 2 screws in the back, remove the lower small cover on the back of the oven and then unplug the old element, unscrew the old element on the inside of the stove, then install the new element and put everything back like it was. Nothing to it. It worked like a charm and my oven now heats up fast again. Easiest appliance repair job ever!
Socket Lite come with clips attached to the outside of the housing. After you unhook the 3 lead wires that are attached to the unit. All you have to do is push in on the clips and release the unit. Then you snap in the new unit. Attach the 3 wire leads, put a oven bulb in the socket end, and the install the light cover
