All Installation Instructions for General Electric Range JCK5000SF4SS

A burnt out bulb

After opening the Oven door, I removed the glass cover to view and locate the bulb, at the inside, top front of the Oven. Removed the burnt out bulb by pulling it in a forward motion towards the front of the Oven, slid the new bulb into place and the Oven is again functional.

Parts Used:

Range Lamp Halogen Bulb G9

George from PALM COAST, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

11 of 18 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

The oven would not hold an even temperature.

I used a Trox bit to remove one screw, replaced the oven sensor and reinstalled the screw. The whole project took less than 5 minutes.

Parts Used:

SENSOR Assembly

Jack from Bremerton, WA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

7 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

F97 code

Replaced upper cooling fan and board on double oven by removing covers on top and back.

Parts Used:

COOLING FAN

Fan Sensor Board

Don from BATON ROUGE, LA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Socket set

6 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

The inner glass of the top wall oven had broken.

I ordered the glass assembly which promptly arrived and I proceeded to unscrew the broken glass assembly and (by myself) removed it with ease. I then placed the new glass assembly and replaced the screws. It was really an easy job, I just retraced my steps from removing the broken assembly and replacing it with the new assembly. By the way, it was the first time I had done this.

Parts Used:

WINDOW PACK Assembly

robert from BOWIE, MD
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Wrench (Adjustable)

5 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

The oven was burning when cooking at same temperature we always cooked it on

there was one screw holding it on the back wall of the oven. It was easy enough that my daughter installed it with my guidance.

Parts Used:

SENSOR Assembly

Don from HASLET, TX
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

5 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

The inner glass on the door broke

Watched a video on how to replace , had no problem remaking the repair, part was a perfect fit and had no hang up or issues

Parts Used:

WINDOW PACK Assembly

James from METAIRIE, LA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers

4 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Fan motor not operating

Removed screws from front of oven, placed a table under oven 2” below, places two rollers on table and pulled out the oven. Removed screws, replaced fan and reassembled. Move into place and secured front. Cleared faults and worked perfectly.

Parts Used: