JBP89SL1SS General Electric Range - Overview
Sections of the JBP89SL1SS
[Viewing 6 of 6]
Manuals & Care Guides for JBP89SL1SS
Click to downloadKeep searches simple, eg. "belt" or "pump".
Light Bulb - 40W
PartSelect #: PS217532
Manufacturer #: 40A15
This 40-Watt light bulb is sold individually.
It is specially designed to withstand extreme temperatures, so this bulb is compatible with a variety of appliance types including refrigerators, ranges,...
$19.10
Special Order
Temperature Sensor
PartSelect #: PS10059162
Manufacturer #: WB21X22134
The temperature sensor detects the temperature within the oven cavity. If your oven is too hot, not heating evenly, or has little to no heat when baking, you may need to replace the temperature sensor...
$36.73
Special Order
Lens
PartSelect #: PS1020380
Manufacturer #: WB25T10041
This part is a replacement lens for your oven or range. The lens is red in color, and when the elements are turned on, the light behind the lens will turn on to inform the user that the element is, in...
$13.95
Special Order
Foot - Leveller
PartSelect #: PS223802
Manufacturer #: WB02X10521
Sold individually.
$29.72
Special Order
CONTROL OVEN TO9
PartSelect #: PS16873547
Manufacturer #: WB27X45466
The electronic oven control board manages heating and temperature functions in wall ovens. Modified wiring may require professional installation. Unplug the oven or shut off the circuit breaker before replacing.
No Longer Available
Surface Burner Switch - 240V
PartSelect #: PS2339825
Manufacturer #: WB24T10153
This switch controls the stove top surface burner.
$128.05
Special Order
RECEPTACLE PUSH-IN
PartSelect #: PS752188
Manufacturer #: WB08T10026
This part is the replacement light socket for your oven. The oven light socket provides power to the light, and at the same time holds the light bulb in place.
$15.95
Special Order
Light Lens
PartSelect #: PS1015754
Manufacturer #: WB25T10042
Looking for a way to brighten up your cooking experience? We have just what you need - the authentic GE light lens replacement. This little hero is crucial to your range as it covers both your surface...
$13.95
Special Order
Door Gasket
PartSelect #: PS227138
Manufacturer #: WB04T10022
This gasket is used to seal the oven door.
This Is Approx 73" Long
For 84" Long Order PS227119
$94.43
Special Order
Surface Knob
PartSelect #: PS783522
Manufacturer #: WB03T10203
Sold Individually. This knob takes a double-flat shaft.
$21.95
Special Order
Dual Element Infinite Switch
PartSelect #: PS236780
Manufacturer #: WB24T10058
This switch controls the stove top surface burner.
$195.47
Special Order
Questions And Answers for JBP89SL1SS
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the JBP89SL1SS
[Viewing 9 of 9]Little to no heat when baking
Fixed by
these parts
these parts
Show All
Element will not heat
Fixed by
these parts
these parts
Show All
Oven not heating evenly
Fixed by
these parts
these parts
Show All
Touchpad does not respond
Fixed by
these parts
these parts
Show All
Oven is too hot
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Will not program
Fixed by
these parts
these parts
Show All
Little to no heat when broiling
Fixed by
these parts
these parts
Show All
Timer will not advance
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Oven would go in to a F2 Error
Removed six 1/4" hex nuts on rear of oven. Then through front/inside removed a single 1/4" hex nut to actually remove sensor. Unplug sensor connector, remove. Reversed steps, push oven back in place and plugged in. Tested oven function.
Parts Used:
-
Peter from stamford, CT
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
148 of 226 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Blown Oven Control Board
After removing the back of the range the oven control board was visible and accessible by removing four nuts. There was some resistance removing the leads from the oven coils and light-bulb mechanisms but with some leverage and pliers they came loose. The only challenge was the face plate of the unit is attached using adhesive and needed to be carefully peeled off and added to the new oven control board. Getting this right was just a matter of taking time and lining up the components correctly. After applying the face, the new control board went right in. I reattached the back, plugged the unit back in, and the over has worked great for the past week. Part select being able to identify the part numbers listed from the component likely saved me at least $100 of having a GE certified repair technician come in.
Parts Used:
-
Julien from Barnhart, MO
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
56 of 63 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Coil Burned Out
Open lid,un screw coil,pop in new coil snap holders in place,then cook a steak
Parts Used:
![](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/17645254-1-S-GE-WB30X44826-6-amp-quot-Heating-Element.jpg "6" Heating Element – Part Number: WB30X44826")
-
Frank from St Augustine, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
62 of 93 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!