This 9-inch radiant element sits under your cooktop and heats your pots and pans while you cook. If it’s not heating up or cooking unevenly, it’s time for a replacement. It’s the larger burner on your...
If your cooktop burner isn’t heating up, this 12-inch haliant surface element might be the fix. It sits under the glass top and provides the heat for your cooking surface. You’ll need to unplug the ra...
The temperature sensor detects the temperature within the oven cavity. If your oven is too hot, not heating evenly, or has little to no heat when baking, you may need to replace the temperature sensor...
This part is a replacement lens for your oven or range. The lens is red in color, and when the elements are turned on, the light behind the lens will turn on to inform the user that the element is, in...
The GE Oven Door Window Pack Assembly is a genuine OEM part that fits select GE ranges and ovens. It includes a heat-resistant inner glass panel, frame, and seals, providing insulation and clear visib...
This light switch is controlled by opening and closing the oven door
$39.71
Special Order
Questions And Answers for JB705ST3SS
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Barbara
December 10, 2024
Need an element for the large isle on this stove… measure 11.25 inches..???
For model number JB705ST3SS
Hi Barbara, Thank you for writing. The Front Right Triple Burner is listed as PartSelect #: PS2321560. We hope this helps, good luck with the repair!
Oven won't hold temperature. We've replaced the oven temp probe. And this didn't fix the problem. Does this model have a thermostat that can be replaced or is it all in the control panel. Thank you. If so, where is it located and where can I get one.
For model number JB705ST3SS
Hi Keith, thank you for reaching out. There is no other thermostat. As you have already replaced the oven temperature sensor, the issue could be with the oven control board, part number PS3501323. It monitors the oven temperature and controls the oven heating functions. You may need to replace it to fix the issue. We hope this solves your problem!
Was this helpful?
Thank you for voting!
Madhab
March 20, 2025
I looking for the replacement burner 7” and 12”
For model number JB705ST3SS
Hello Madhab, thank you for your question. The front right burner is PS2321560. The front left is PS2321567. The center burner is PS2321558. The rear left and right are PS2321563. Good luck with your project.
where can i get temp decals that goes around the dials.
For model number JB705ST3SS
Hello John, thank you for getting in touch. The decals you are looking for do not come separately and they come as a part of the trim control assembly, part number PS3510945. Glad to be of help!
Removed six 1/4" hex nuts on rear of oven. Then through front/inside removed a single 1/4" hex nut to actually remove sensor. Unplug sensor connector, remove. Reversed steps, push oven back in place and plugged in. Tested oven function.
The existing terminal block on my Ge oven/Range had melted due to a loose wire causing sparking and starting the plastic casing of the terminal block on fire and melting it, Part select made the part easy to find and had it at my house in 2 days. All I had to do was remove six screws to take the back sheet metal cover off of the oven. Unscrew the terminal connections remove two mounting screws that held the terminal on to the oven body. This was a little trickier than it should have been because the melted plastic had reformed making it very hard to access the mounting screws. i then mounted the new piece and plugged the oven in, it took 15 minutes and was very easy. definitely saved me at-least a $100 for the service call i would have made if finding the part wasn't so convenient
I started by Unscrewing the range top. 2 small screws. I took off the old piece by unclipping the piece . Then I color coded each wire so that I would know exactly where I would place the wires for the new part. 30 min maximum time spent changing the part. Please don't forget to unplug the range before you start.
