This 40-Watt light bulb is sold individually.
It is specially designed to withstand extreme temperatures, so this bulb is compatible with a variety of appliance types including refrigerators, ranges,...
The temperature sensor detects the temperature within the oven cavity. If your oven is too hot, not heating evenly, or has little to no heat when baking, you may need to replace the temperature sensor...
If your stove’s burner isn’t heating right—maybe it’s stuck on high or won’t turn on at all—this control switch could be the fix. It’s made for 6-inch burners and lets you adjust the heat smoothly, no...
This genuine GE drawer support is an original replacement part sourced from the manufacturer and is designed for use with electric ranges. Made of durable plastic, it attaches to the rear of the drawe...
The electronic oven control board manages heating and temperature functions in wall ovens. Modified wiring may require professional installation. Unplug the oven or shut off the circuit breaker before replacing.
This part is the replacement light socket for your oven. The oven light socket provides power to the light, and at the same time holds the light bulb in place.
Looking to fix your range drawer? You're in the right place. First things first, the GE Front Drawer Support is the key to maintaining stability'and without it, your range drawer might wobble or becom...
This part is a replacement screw for your oven. It is made of black metal and is sold individually. This screw is approximately 1/4 inch in diameter and about 1/2 inch in length. It is designed to con...
Keep your GE range operating efficiently and looking great with this factory-made white oven door handle. Crafted exclusively for GE ranges, you can have confidence in its quality, fit, and durability...
$178.24
Special Order
Questions And Answers for JB645DK3WW
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
November 26, 2019
Where can i get products to clean the stovetop
For model number JB645DK3WW
Hello John, thank you for writing. The acidity of vinegar works well to remove grime. Mix one part white vinegar to two parts tap water in an unused spray bottle. You can obtain these items at a local grocery store. Good luck with your cleaning!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Robbin
April 20, 2023
The glass cooktop shattered and I only need to replace the glass, not the elements or the whole assembly. Is this possible and what is the cost?
For model number JB645DK3WW
Hi Robbin, Thank you for writing. The Glass Top is Part #: PS11762853 and does not include the elements. All current prices are shown on the site. We hope this helps!
Was this helpful?
Thank you for voting!
Nick
December 23, 2024
Is the element in the top range hard to change out?
For model number JB645DK3WW
Hi Nick, thank you for contacting us. No, changing the top element is not hard. You will need to remove the top glass panel, disconnect and remove the old element, install the new one, and then reattach the top glass panel. We hope this information is useful!
Was this helpful?
Thank you for voting!
Tracey
February 2, 2025
Do you guys sell a thermostat for this stove?
For model number JB645DK3WW
Hello Tracey, Thank you for writing. The Oven Temperature Sensor or Thermostat is listed as PartSelect Number PS10059162. We hope this helps, good luck with the repair!
Removed six 1/4" hex nuts on rear of oven. Then through front/inside removed a single 1/4" hex nut to actually remove sensor. Unplug sensor connector, remove. Reversed steps, push oven back in place and plugged in. Tested oven function.
After removing the back of the range the oven control board was visible and accessible by removing four nuts. There was some resistance removing the leads from the oven coils and light-bulb mechanisms but with some leverage and pliers they came loose. The only challenge was the face plate of the unit is attached using adhesive and needed to be carefully peeled off and added to the new oven control board. Getting this right was just a matter of taking time and lining up the components correctly. After applying the face, the new control board went right in. I reattached the back, plugged the unit back in, and the over has worked great for the past week. Part select being able to identify the part numbers listed from the component likely saved me at least $100 of having a GE certified repair technician come in.
The existing terminal block on my Ge oven/Range had melted due to a loose wire causing sparking and starting the plastic casing of the terminal block on fire and melting it, Part select made the part easy to find and had it at my house in 2 days. All I had to do was remove six screws to take the back sheet metal cover off of the oven. Unscrew the terminal connections remove two mounting screws that held the terminal on to the oven body. This was a little trickier than it should have been because the melted plastic had reformed making it very hard to access the mounting screws. i then mounted the new piece and plugged the oven in, it took 15 minutes and was very easy. definitely saved me at-least a $100 for the service call i would have made if finding the part wasn't so convenient
