This 40-Watt light bulb is sold individually.
It is specially designed to withstand extreme temperatures, so this bulb is compatible with a variety of appliance types including refrigerators, ranges,...
The temperature sensor detects the temperature within the oven cavity. If your oven is too hot, not heating evenly, or has little to no heat when baking, you may need to replace the temperature sensor...
If your stove’s burner isn’t heating right—maybe it’s stuck on high or won’t turn on at all—this control switch could be the fix. It’s made for 6-inch burners and lets you adjust the heat smoothly, no...
This genuine GE drawer support is an original replacement part sourced from the manufacturer and is designed for use with electric ranges. Made of durable plastic, it attaches to the rear of the drawe...
The electronic oven control board manages heating and temperature functions in wall ovens. Modified wiring may require professional installation. Unplug the oven or shut off the circuit breaker before replacing.
This part is the replacement light socket for your oven. The oven light socket provides power to the light, and at the same time holds the light bulb in place.
Looking to fix your range drawer? You're in the right place. First things first, the GE Front Drawer Support is the key to maintaining stability'and without it, your range drawer might wobble or becom...
This part is a replacement screw for your oven. It is made of black metal and is sold individually. This screw is approximately 1/4 inch in diameter and about 1/2 inch in length. It is designed to con...
This is the door pad only. The trim is sold separately.
$13.95
Special Order
Questions And Answers for JB645DK3BB
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Alan
October 26, 2021
Automatic oven light stays on, is this a problem? What does it mean?
For model number JB645DK3BB
Hello Alan, Thank you for the question. If the light does not turn off, we suggest checking the door to make sure it is closing properly. It can also indicate the Switch in the Door Lock is defective and the Lock may need to be replaced. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Lance
January 11, 2023
THE 2 FRONT BURNERS ON THE STOVE ONLY HEAT TO HIGH THUS BURNING EVERYTHING. WHAT DO I NEED TO LOOK AT. THANKS MUCH!!
For model number JB645DK3BB
Hello Lance, thank you for reaching out. The problem seems to be with the Element Control Switch and you may need to replace it, the part number is PS11729102. The Element Control Switch turns the surface element on and off and controls how much heat the element produces. Please reach out to customer service if you need help placing an order, anyone will be happy to assist you. We hope that helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Justin
December 3, 2025
The digital display doesn't come on unless you turn the knob on for one of the stove top burners or turn the oven on, but when these are turned on it's also not heating. Please help!
For model number JB645DK3BB
Hi Justin, thank you for your inquiry. According to the issue description, we would recommend replacing the control board, part number PS16873547, to fix the issue. Glad to be of help!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Removed six 1/4" hex nuts on rear of oven. Then through front/inside removed a single 1/4" hex nut to actually remove sensor. Unplug sensor connector, remove. Reversed steps, push oven back in place and plugged in. Tested oven function.
After removing the back of the range the oven control board was visible and accessible by removing four nuts. There was some resistance removing the leads from the oven coils and light-bulb mechanisms but with some leverage and pliers they came loose. The only challenge was the face plate of the unit is attached using adhesive and needed to be carefully peeled off and added to the new oven control board. Getting this right was just a matter of taking time and lining up the components correctly. After applying the face, the new control board went right in. I reattached the back, plugged the unit back in, and the over has worked great for the past week. Part select being able to identify the part numbers listed from the component likely saved me at least $100 of having a GE certified repair technician come in.
The existing terminal block on my Ge oven/Range had melted due to a loose wire causing sparking and starting the plastic casing of the terminal block on fire and melting it, Part select made the part easy to find and had it at my house in 2 days. All I had to do was remove six screws to take the back sheet metal cover off of the oven. Unscrew the terminal connections remove two mounting screws that held the terminal on to the oven body. This was a little trickier than it should have been because the melted plastic had reformed making it very hard to access the mounting screws. i then mounted the new piece and plugged the oven in, it took 15 minutes and was very easy. definitely saved me at-least a $100 for the service call i would have made if finding the part wasn't so convenient
