This 40-Watt light bulb is sold individually.
It is specially designed to withstand extreme temperatures, so this bulb is compatible with a variety of appliance types including refrigerators, ranges,...
The temperature sensor detects the temperature within the oven cavity. If your oven is too hot, not heating evenly, or has little to no heat when baking, you may need to replace the temperature sensor...
If your stove’s burner isn’t heating right—maybe it’s stuck on high or won’t turn on at all—this control switch could be the fix. It’s made for 6-inch burners and lets you adjust the heat smoothly, no...
This genuine GE drawer support is an original replacement part sourced from the manufacturer and is designed for use with electric ranges. Made of durable plastic, it attaches to the rear of the drawe...
The electronic oven control board manages heating and temperature functions in wall ovens. Modified wiring may require professional installation. Unplug the oven or shut off the circuit breaker before replacing.
This part is the replacement light socket for your oven. The oven light socket provides power to the light, and at the same time holds the light bulb in place.
Looking to fix your range drawer? You're in the right place. First things first, the GE Front Drawer Support is the key to maintaining stability'and without it, your range drawer might wobble or becom...
This part is a replacement screw for your oven. It is made of black metal and is sold individually. This screw is approximately 1/4 inch in diameter and about 1/2 inch in length. It is designed to con...
$13.95
Special Order
Questions And Answers for JB645DK1BB
Ask our experts a question about this model and we'll get back to you as soon as possible!
7 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Theo
November 29, 2023
i replaced the element. On smooth top oven it works fine but won't lower heat on large and small coil which is why I changed whol thing in the first place what am i missing
For model number JB645DK1BB
Hello Theo, thank you for getting in touch. According to our research, the issue is with the surface element switch. Your model comes with the 6 inches and 9/6 inches elements. The surface element switch for 6 inches elements is part number PS236754, and the surface element switch for 9/6 inches elements is part number PS11729102. We hope this information helps!
1 personfound this helpful.
Was this helpful?
Thank you for voting!
Jung
March 30, 2025
The burner which can be used selectively large or small has an issue. Large or small, whatever I select, It turns on and heat only for 30 seconds. And stays warm with the lowest heat level.
Is there a problem on the sensor? Or the control knob?
Please let me know what part I need to replace.
For model number JB645DK1BB
Hi Jung,
Thank you for your question. If you are unable to adjust the setting for the dual element, you will need to check both the element and the burner switch for continuity with a multimeter on the Rx1 setting to see which part is causing the issue. Before removing and checking these parts, unplug the washer from the electrical outlet. When testing the element, you should receive a reading between 19 and 115 ohms. If you get any other reading, you will need to replace the element. When testing the switch, touch the L1 and H1 terminals with the probes. Once you have completed that test, touch the probes to the L2 & H2 terminals. If your test results indicate that there is no continuity between one or both sets of terminals, you need a replacement burner switch. We hope this helps!
1 personfound this helpful.
Was this helpful?
Thank you for voting!
Jerry
March 28, 2026
Do you have burner dial number replacement numbers? The ones on our stove have worn off.
For model number JB645DK1BB
Hello Jerry, thank you for getting in touch. The part you are looking for is the control panel trim, part number PS12725540. We hope this helps.
Was this helpful?
Thank you for voting!
William
December 11, 2024
My large burner will not heat up and also my hot cooktop light on surface will not go out GE Stove model # JB645DK1BB Thanks
For model number JB645DK1BB
Hello William, thank you for your question. You will need to replace the Light Indicator Switch PS8767096. For the Element, the issue is most likely the switch but you really should test both the Switch PS11729102 and the element PS11729126. Good Luck with your repair.
Hi Farrell, thank you for asking. The "F2" error code indicates the oven temperature has exceeded a safe threshold and the sensor PS10059162 could be defective and needs to be replaced. You can verify this by testing the sensor. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. If the sensor is good, you may have a faulty oven control board. We hope this information helps!
Removed six 1/4" hex nuts on rear of oven. Then through front/inside removed a single 1/4" hex nut to actually remove sensor. Unplug sensor connector, remove. Reversed steps, push oven back in place and plugged in. Tested oven function.
After removing the back of the range the oven control board was visible and accessible by removing four nuts. There was some resistance removing the leads from the oven coils and light-bulb mechanisms but with some leverage and pliers they came loose. The only challenge was the face plate of the unit is attached using adhesive and needed to be carefully peeled off and added to the new oven control board. Getting this right was just a matter of taking time and lining up the components correctly. After applying the face, the new control board went right in. I reattached the back, plugged the unit back in, and the over has worked great for the past week. Part select being able to identify the part numbers listed from the component likely saved me at least $100 of having a GE certified repair technician come in.
The existing terminal block on my Ge oven/Range had melted due to a loose wire causing sparking and starting the plastic casing of the terminal block on fire and melting it, Part select made the part easy to find and had it at my house in 2 days. All I had to do was remove six screws to take the back sheet metal cover off of the oven. Unscrew the terminal connections remove two mounting screws that held the terminal on to the oven body. This was a little trickier than it should have been because the melted plastic had reformed making it very hard to access the mounting screws. i then mounted the new piece and plugged the oven in, it took 15 minutes and was very easy. definitely saved me at-least a $100 for the service call i would have made if finding the part wasn't so convenient
