This burner bowl is also known as a burner drip bowl or burner drip pan, and is designed for use with your cooktop or range. It is black in color and is approximately 6 inches in diameter. It can be f...
The bake element is located on the bottom of the oven. If your oven will not heat properly it may be due to a faulty or damaged baking element. If you can see that the element has been separated or bl...
The 8-inch surface element switch is also known as an infinite heat switch, and is a part for your range. It controls the large surface element. It will turn the element on and off, and allow you to c...
This 40-Watt light bulb is sold individually.
It is specially designed to withstand extreme temperatures, so this bulb is compatible with a variety of appliance types including refrigerators, ranges,...
This is a replacement drawer support for your oven. The drawer support provides stability to the drawer unit as it opens and closes. If your oven drawer is hanging or will not slide in or out efficien...
This part is a replacement lens for your oven or range. The lens is red in color, and when the elements are turned on, the light behind the lens will turn on to inform the user that the element is, in...
If your oven isn’t getting hot enough when you broil, this replacement broil element could be the fix. It’s the part that heats from the top of the oven to give food that crispy finish. Easy to instal...
The electronic oven control board manages heating and temperature functions in wall ovens. Modified wiring may require professional installation. Unplug the oven or shut off the circuit breaker before replacing.
Upgrade your oven’s cooking performance with this sturdy metal rack, designed to fit select gas ranges and ovens. Measuring approximately 23.75 inches long by 16.25 inches wide, it offers a spacious a...
$93.64
Special Order
Questions And Answers for JB256DM2BB
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
6 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Russell
January 16, 2024
Hello. i entered my Model# but it says it doesn’t exist. I have a picture of it if you want. i need to replace a 6” burner.
For model number JB256DM2BB
Hi Russell, thank you for getting in touch. The surface burner you are looking for is part number PS12702985. If you need help placing an order for it, please feel free to give us a call!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Bill
September 12, 2022
Burner light stays on
For model number JB256DM2BB
Hello Bill, thank you for your inquiry. Our research on your model number suggests that the issue is likely to be with the Surface Burner Switch. The part number for the 8-inch burner is PS236750, and for the 6-inch burner is PS236747. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair!
I need one 8 inch burner. (Radient surface element) can't find. Not found on GE's site. Many there, not this exact one. Why?
Thanks,
Matt
For model number JB256DM2BB
Hi Matt, thank you for your query. The 8" radiant surface element that you are looking for is part number PS12582590. We hope this solves your problem!
Was this helpful?
Thank you for voting!
Larry
April 26, 2023
Part # for 8" burner element replacement
For model number JB256DM2BB
Hello Larry, thank you for your inquiry. The 8-inch surface element, part number PS12582590, is compatible with your model. We hope this is what you were looking for!
Was this helpful?
Thank you for voting!
Robert
November 26, 2024
ATTEMPTED TO ACTIVATE SELF CLEAN. DID NOT WORK, NOW OVEN DOES NOT WORK. SCREEN FLASHES BETWEEN "LOCKED" and "ON" THEN GOES BACK TO TIME AFTER 10 SECONDS
For model number JB256DM2BB
Hi Robert,
Thank you for your question. If the self clean function on your range did not work, check and make sure that the door is fully closed and latched. If the door is not closed completely the self clean cycle will not start. Also inspect the latch assembly to make sure that it is functioning normally. You will need to test it for continuity with a multimeter on the Rx1 setting. If you receive a reading of about 2000 ohms, then the lock is fine. If you get any other reading, you will need to replace the latch assembly. If the latch assembly is fine. Check the settings on the control panel to see if they are set correctly. If the issue persists, reset the oven by unplugging it or turning the circuit breaker off for a few minutes. We hope this helps!
First I slid the stove out and unpluged it, then removed two screws,slid out element, disconected two wires, slid new element in to place, pluged two wires in ,put into place and installed two screws, pluged stove back in, and turned on to try. Works perfect.
1)Turn off power to stove 2)remove 2 bolts holding heating element 3)pull element out of the back of the oven about 8" so that the wire connects is visable 4)pull wire clips off of heating element and remove element from the oven 5)put wire clips on the new heating element 6)push new heating element back into the holes in the back of the oven 7)screw botls back into the oven holding the heating element in place 8)Turn power back on
After removing the back of the range the oven control board was visible and accessible by removing four nuts. There was some resistance removing the leads from the oven coils and light-bulb mechanisms but with some leverage and pliers they came loose. The only challenge was the face plate of the unit is attached using adhesive and needed to be carefully peeled off and added to the new oven control board. Getting this right was just a matter of taking time and lining up the components correctly. After applying the face, the new control board went right in. I reattached the back, plugged the unit back in, and the over has worked great for the past week. Part select being able to identify the part numbers listed from the component likely saved me at least $100 of having a GE certified repair technician come in.
