HTS18GCNACC Hotpoint Refrigerator - Overview

Sections of the HTS18GCNACC

[Viewing 3 of 3]
Keep searches simple, eg. "belt" or "pump".
Light Bulb - 40W – Part Number: 40A15
Light Bulb - 40W
★★★★★
★★★★★
(3)
PartSelect #: PS217532
Manufacturer #: 40A15
This 40-Watt light bulb is sold individually. It is specially designed to withstand extreme temperatures, so this bulb is compatible with a variety of appliance types including refrigerators, ranges,...
$19.10
  Special Order
Door Basket – Part Number: WR17X11502
Door Basket
PartSelect #: PS964170
Manufacturer #: WR17X11502
Also known as Door Bin.
  No Longer Available
THERMOSTAT – Part Number: WR17X11371
THERMOSTAT
PartSelect #: PS758922
Manufacturer #: WR17X11371
  No Longer Available
FF LIGHT PUSH – Part Number: WR23X10283
FF LIGHT PUSH
PartSelect #: PS759462
Manufacturer #: WR23X10283
  No Longer Available
STOPPER Complete – Part Number: WR02X11306
STOPPER Complete
PartSelect #: PS758423
Manufacturer #: WR02X11306
$13.95
  Special Order
Fresh Food Door Gasket - White – Part Number: WR24X10122
Fresh Food Door Gasket - White
PartSelect #: PS759521
Manufacturer #: WR24X10122
This white fresh food door gasket is used to seal the refrigerator door when closed to keep the cool air inside and the room air out.
  No Longer Available
TIMER – Part Number: WR55X10229
TIMER
PartSelect #: PS760046
Manufacturer #: WR55X10229
$117.16
  Special Order
Refrigerator Condenser Fan Blade – Part Number: WR60X10109
Refrigerator Condenser Fan Blade
PartSelect #: PS760117
Manufacturer #: WR60X10109
  No Longer Available
R134 DRIER – Part Number: WR86X25269
R134 DRIER
PartSelect #: PS12727537
Manufacturer #: WR86X25269
The filter dryer filters refrigerant that travels through the sealed system of the refrigerator.
  No Longer Available
RUBBER PIPE – Part Number: WR02X11327
RUBBER PIPE
PartSelect #: PS758444
Manufacturer #: WR02X11327
$9.95
  Special Order
USE & CARE MANUAL – Part Number: 39-60199
USE & CARE MANUAL
PartSelect #: PS773828
Manufacturer #: 39-60199
  No Longer Available
CAP,SCREW – Part Number: WR02X11356
CAP,SCREW
PartSelect #: PS773978
Manufacturer #: WR02X11356
  No Longer Available

Questions And Answers for HTS18GCNACC

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Interior light needed replaced
Unplugged the appliance for safety. Removed two 1/4" screws that held the assembly in place. Carefully removed the wire guard that retains the glass shield. Unscrewed old light bulb and replaced with new part. Reversed the steps after cleaning glass cover.
Parts Used:
Light Bulb - 40W
  • Leo from TWIN FALLS, ID
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
22 of 43 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Twice I ordered the oven light bulb & each time the light bulb was defected
I had to call for a appointment for repair with GE Appliance because I thought then it . .was something electrical. The technician came out & checked everything out, turned out it was not electrical, The technician went out to his truck got a light bulb from his truck, put it in & it worked. It cost me $121.00 for trip charge from GE appliance for a light bulb that worked, your light bulbs were defective twice. Very disappointed with your products, cost me alot of money for a good light bulb thru GE appliance
Parts Used:
Light Bulb - 40W
  • Barbara from BELLEVUE, WA
  • Difficulty Level:
    Very Difficult
  • Total Repair Time:
    Less than 15 mins
15 of 32 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The light inside the oven had burned out
0. As a safety precaution, unplug the range or hit the relevant fuse breaker before you start. You might also want to grab a flashlight. Definitely do not try to do this while the oven is hot.
1. Pinch the wire over the light bulb cap to remove it. This is inside the oven at the back.
2. Pop off the hemispherical glass cap.
3. Unscrew the old light bulb, and screw the new light bulb in its place.
4. Put the cap back.
5. Secure the cap by putting the wire back in its slots on the cap.

No tools needed, the cap is just held in place with pressure from the wire.
Parts Used:
Light Bulb - 40W
  • Catherine from SEATTLE, WA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!