HS1010 (Type 2) Black and Decker Hedge Trimmer - Overview
Sections of the HS1010
[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Screw
PartSelect #: PS10169698
Manufacturer #: 330019-09
Included in part number 143843-00
$5.95
Special Order
Nut,lock
PartSelect #: PS9893865
Manufacturer #: 148641-00
Included in part number 386527-02
$5.95
Special Order
Screw
PartSelect #: PS10036855
Manufacturer #: 98022-16
This authentic manufacturer-sourced screw is made for use with Black and Decker and DeWALT hedge trimmers. It is an identical replacement for a missing or a damaged hardware that was installed on a ne...
No Longer Available
Switch
PartSelect #: PS10022803
Manufacturer #: 90541380
This authentic OEM sourced replacement switch is produced for use with Black and Decker and Dewalt hedge trimmers. Its function is to allow user to turn the equipment on and off. Because switches use ...
$5.95
Special Order
Terminal
PartSelect #: PS10165861
Manufacturer #: 137646-00
This is a genuine component which is sourced from the original manufacturer for use with DeWALT, Black and Decker and Porter Cable power tools. The special terminal is commonly used to link the wire f...
$5.95
Special Order
Questions And Answers for HS1010
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Broken power input terminal
I found this unit by the side of the road. One power input terminal was loose. Inside it was broken. Replacement was to remove the screws, pull out the wire, and cut the wire next to the terminal. I was able to strip the wire and crimp it in the terminal. I then soldered both terminals for a good connection.
Parts Used:
-
Curtis from Huntsville, AL
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
6 of 15 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!