If your oven isn’t heating properly or your food isn’t baking evenly, this bottom heating element might be the issue. It provides steady heat for baking and roasting and fits select Bosch, Thermador, ...
$151.57
In Stock
Order within the next 7 hrs and your part ships today!
This wire oven rack provides a stable, flat surface for baking, roasting, and cooking, ensuring even heat distribution throughout the process. Designed for durability and a precise fit, it helps organ...
$106.85
In Stock
Order within the next 7 hrs and your part ships today!
This genuine temperature sensor ensures precise heat regulation inside your oven for consistent cooking results and improved safety. Designed to measure the oven cavity temperature, it communicates wi...
$73.91
In Stock
Order within the next 7 hrs and your part ships today!
Need a new display module for your Bosch, Thermador, or Gaggenau appliances? You're in the right place! We have the authentic Bosch Display Module that's built specifically for these brands. This impo...
$352.54
In Stock
Order within the next 7 hrs and your part ships today!
This meat probe is designed to help achieve precise cooking results by accurately monitoring the internal temperature of food while it cooks in the oven. The metal probe is inserted directly into meat...
$160.08
In Stock
Order within the next 7 hrs and your part ships today!
This outer oven door panel serves as the exterior heat shield and protective surface for your Bosch wall oven or range, helping maintain heat efficiency while providing a sleek, durable finish. Often ...
$514.31
In Stock
Order within the next 7 hrs and your part ships today!
When your Bosch, Thermador, or Gaggenau appliance starts to lose its heat, it can be a real headache. But don't worry, that's where this authentic Bosch Heating Element comes in! It's not just a spare...
$180.85
In Stock
Order within the next 7 hrs and your part ships today!
Make cooking easier with this telescopic oven rack for Bosch wall ovens. It slides out fully so you can check or remove dishes without reaching into a hot oven. The smooth ball-bearing design handles ...
$669.83
In Stock
Order within the next 7 hrs and your part ships today!
Questions And Answers for HBL8451UC
Be the first to ask our experts a question about this model!
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
First, cut the power and remove the oven from the cabinet.
The bake element is accessible from the back and sits in a drawer.
As someone else said, you have to use pliers to bend the cover of the drawer, you will make some damage to the cover, but there is nothing you can do about it.
Make a note of what wire goes to the right and to the left so you can plug them back like it was before.
When you replace the bake element, make sure you insert it in the straps so it won't wiggle when it heats.
To close the cover that you bent, you will need a helper and push really hard.
Watch the YouTube video. Turn off power or unplug the range. Remove 5 gas control knobs. Remove four T20 screws on Control panel. one on each end, L and R, two underneath, L and R. Pull off control panel and carefully flip it up onto the range, being careful not to stretch the wiring harness. Carefully remove two wiring connectors (pinch and pull method) Remove four T20 screws securing the Control panel mount then turn it over 180 degrees. Straighten the mounting tabs until the control panel easily slides off of its mount. Remove and replace the control panel and sheet. Reverse the procedure to reinstall. It took me longer to clean the components and the area that to repair the problem. Tip: Isopropyl alcohol in a spray bottle and a cloth cuts the grease and grime, if needed, with very little effort and no scratching.
