If your oven isn’t heating properly or your food isn’t baking evenly, this bottom heating element might be the issue. It provides steady heat for baking and roasting and fits select Bosch, Thermador, ...
This wire oven rack provides a stable, flat surface for baking, roasting, and cooking, ensuring even heat distribution throughout the process. Designed for durability and a precise fit, it helps organ...
This outer oven door panel serves as the exterior heat shield and protective surface for your Bosch wall oven or range, helping maintain heat efficiency while providing a sleek, durable finish. Often ...
When your Bosch, Thermador, or Gaggenau appliance starts to lose its heat, it can be a real headache. But don't worry, that's where this authentic Bosch Heating Element comes in! It's not just a spare...
This halogen lamp is a replacement light bulb used inside ovens, ranges, and microwaves to provide bright, clear illumination while cooking. It restores proper visibility when the original bulb burns ...
$67.40
In Stock
Questions And Answers for HBL5651UC/05
Be the first to ask our experts a question about this model!
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Removed the wall oven to access temp probe connector strapped to the back of the oven. removed 2 screws holding probe inside the oven & replaced. Searched for the "fixing kit" thermostat part I was suggested to replace along with the probe. No thermostat type part was found in my oven, even though Bosch says it fits "somewhere". Reinstalled the wall oven & tested. The temperature is working normal now. Will return the fixing kit.
First, cut the power and remove the oven from the cabinet.
The bake element is accessible from the back and sits in a drawer.
As someone else said, you have to use pliers to bend the cover of the drawer, you will make some damage to the cover, but there is nothing you can do about it.
Make a note of what wire goes to the right and to the left so you can plug them back like it was before.
When you replace the bake element, make sure you insert it in the straps so it won't wiggle when it heats.
To close the cover that you bent, you will need a helper and push really hard.
