This water filter purifies water going to the water dispenser and sometimes the icemaker as well. This part should be replaced if it is causing reduced water flow or just replaced periodically per the...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This compressor start relay is for refrigerators. The compressor start relay attaches to the compressor and helps start the compressor motor. Safely store any food that could deteriorate while the pow...
This light switch may also be known as a refrigerator door switch or a light switch kit, and is compatible with your refrigerator. The function of the refrigerator door switch is to turn on the light ...
This is a replacement pivot block for your refrigerator. It is made of white plastic and is approximately 4 inches long and 1 inch wide. The pivot block catches and holds the door mullion cover when y...
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
Sold individually. This door bin is for refrigerators.
Door bin attaches to the inside of the refrigerator door and typically holds jars and bottles.
Follow the instructions in the owner's manua...
This kickplate grille is attached to the bottom of the refrigerator.
$102.09
In Stock
Questions And Answers for GZ25FSRXYY2
Ask our experts a question about this model and we'll get back to you as soon as possible!
7 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jerry
June 24, 2021
Icemaker not making ice, waterworks, motorworks, any help?
For model number GZ25FSRXYY2
Hello Jerry, Thank you for the question. The first thing is to check the Water Filter. If the filter has not been changed in the last 6 months, it will clog up and prevent the water to flow to the Ice Maker. It can eventually effect the Water Dispenser as well. You can also check the Cycling thermostat. The ice maker thermostat, also known as the cycling thermostat, controls and regulates the ice maker ejection cycle by monitoring the temperature inside the freezer to determine when to release the ice into the bin and start the ice making cycle again. If your ice maker is making unusual noises, or if the ice maker is not making or dispensing ice, there could be an issue with the thermostat. If there is no continuity when tested with a multi meter then it will need to be replaced. We hope this helps!
Hello, Thank you for your question. You will need to check into the Ice Dispenser motor- PS11750315. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Gary
November 13, 2021
How to disconnect icemaker
For model number GZ25FSRXYY2
Hello Gary, Thank you for the question. Here is a link to a How to Video. The appliance may not be the same but should have the same basic steps. We hope this helps!
Was this helpful?
Thank you for voting!
Deborah
May 26, 2022
Ice maker has no water in it. How do I pull out the ice maker to check problem. We are able to get water out of the dispenser. The ice maker dispenser does not give the option of ice cubes any more just crushed
For model number GZ25FSRXYY2
Hello Deborah, Thank you for the question. We have attached a How to Video and it will show how to remove the Ice Maker. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Frank
November 16, 2022
Where is the reset button on the ice maker?
For model number GZ25FSRXYY2
Hello Frank, thank you for the question. The reset button on your Whirlpool icemaker is often located under the ice tray. To access it, you must first remove the ice tray. Once you do that, you should see the bright red reset button on the bottom of the ice maker itself. We hope this information helps!
Pressed in the end of the filter cover, lowered it down part way. Twisted the old filter 1/4 turn and removed it. Set in the sink to drain. Inserted new filter and twisted it to lock. closed cover. Done. Total time @ 1 Minute.
I removed the drop-down outer housing by gently prying the sides of the two pivot pins at the rear. This gave me move 'room' to grip and slightly rotate then pull the old filter forward and away from the tight suction connection. I was concerned that I would be too forceful for the plastic assemblies and would break something; deliberate motions and a steady thought process on the problem helped disengage the darned old filter!