This Drive Belt is 89.5" long and comes in black, featuring four ribs on the inside for a better grip. This is a long belt that wraps all the way around the dryer drum, around a tension pulley, and th...
TThe door strike for your dryer is mounted on the dryer frame that the door shuts onto. It fits into the door catch on the door and keeps the door closed. If the door strike is damaged or missing, the...
This drum glide bearing is an authentic OEM replacement part that is compatible with dryers. It is white in color and made of highly durable plastic. The bearing allows the drum to rotate smoothly and...
Restore dependable startup functionality to your dryer with this replacement push-to-start switch, designed to activate the appliance when pressed and released. Compatible with a range of dryer models...
This solid dryer door handle is designed to replace a damaged or broken handle, restoring smooth and reliable opening and closing of the dryer door. Built for durability, it provides a sturdy grip tha...
$38.00
In Stock
Order within the next 4 hrs and your part ships today!
This OEM replacement dryer slide bearing is white in color, and approximately 3 inches long. The slide bearings are supportive linings for your dryer. If they have eroded, or are damaged, the drums wi...
The door latch lid lock is to lock the door on your washer when the appliance is in use. Your washer will not start if your door is not locked. If your latch is broken, you may not be able to start a ...
Is your dryer not working as efficiently as it used to? The problem may lie in its drum support! This GE drum support shaft and bracket assembly offers robust support at the back end of your dryer dru...
Order within the next 4 hrs and your part ships today!
Questions And Answers for GUD37ESMJ0DG
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tony
February 15, 2020
The control knob for the dryer does not work. Will a new knob simply fit on and work? Or does the assembly the knob connects to need to be changed?
For model number GUD37ESMJ0DG
Hello Tony, thank you for your question. Remove the knob and check to see if there are any cracks on the backside of it. The knob can be removed separately from the mechanism it controls that sits behind the control panel. If the knob is fine, the issue could be with the mechanism. Try using a pair of pliers to adjust the mechanism to see if that will work if so, just the knob needs to be replaced. If the mechanism can not be adjusted to a cycle and started the control will need to be replaced. I hope this helps.
1 personfound this helpful.
Was this helpful?
Thank you for voting!
Michel
September 8, 2023
Hello.....we need help fixing our washer. Our washer doesn t spin at his fullest. Spins very slowly.
The pulley is working as it should and spins fast and normaly.
For model number GUD37ESMJ0DG
Hi Michel, thank you for reaching out. The issue is probably because of the drive belt, part number PS16542496. The belt may have got stretched, due to which can not drive the tub correctly. To fix the issue, we suggest replacing the drive belt. We hope this solves your problem!
When you turn the knob it seems to be stripped and wont start , it starts if I push and put pressure on the big button but as soon as I take the pressure off , the dryer stops.
For model number GUD37ESMJ0DG
Hello Glen, thank you for getting in touch. Based on our understanding of the issue, we would suggest replacing the control knob, part number PS16542918, to solve the problem. A worn out control knob can cause this issue. We hope this helps!
dryer works good but the washer flashes green light on panel but nothing comes on
For model number GUD37ESMJ0DG
Hello Jayce, thank you for reaching out to us. According to our research, the flashing green light on the washer usually indicates the control board has power but has detected a fault, most commonly a failed lid lock switch. Check the lid lock assembly, part number PS3496878. It might be faulty or failing to latch the door properly, preventing the washer from starting. We hope this information helps!
Removed the front Dryer panel. Left drum in place and lifted it up slightly to get access to motor drive. Slipped belt in place and put panel back on. This was a first attempt ever at fixing an appliance and it was no big deal.
The end repair was very simple and took minimal effort. The time and difficulty was all in the testing. I disassembled the dryer and removed the drum and then hard wired each thermo-fuse to determine where the fault was. After test all of those I was stumped. When I opened the door the light would not come on so I assumed it was a power fault closer to the source. However after all of my testing I couldn't find anything wrong. I then removed the light bulb and realized it was burned out which led me to the door switch being the fault. I removed the switch and soldered the three wire together and the dryer started right up! All I had to do was order a new $15 part, unsolder the wires and plug them in. Would have been so much simpler if that light bulb hadn't of been burned out causing me to over think my diagnosis. This was my first major appliance repair and I did it with only the help of the parts diagram provided on the website.
I had to take most of the dryer apart because there is no rear access to the motor. It turned out to be easy to dissasembel the dryer. The only problem that I had was that I could not figure out how to route the belt around the motor and the idol pullies. I could not find anywhere that gave instructions on how to properly tension the belt. I finally figured out that the idoler pulley needs to be locked in place on the right side of the engie mount. Then the belt needs to be routed over idoler pulley and under the motor pulley. Finally release the idoler pully from the locked postion to put tension on the belt. It really turned out to be pretty easy.
