This Drive Belt is 89.5" long and comes in black, featuring four ribs on the inside for a better grip. This is a long belt that wraps all the way around the dryer drum, around a tension pulley, and th...
TThe door strike for your dryer is mounted on the dryer frame that the door shuts onto. It fits into the door catch on the door and keeps the door closed. If the door strike is damaged or missing, the...
This Genuine OEM door latch is designed for use with a wide range of GE clothes dryers. Constructed from a combination of durable metal and plastic, the latch is mounted onto the dryer frame to secure...
This drum glide bearing is an authentic OEM replacement part that is compatible with dryers. It is white in color and made of highly durable plastic. The bearing allows the drum to rotate smoothly and...
Restore dependable startup functionality to your dryer with this replacement push-to-start switch, designed to activate the appliance when pressed and released. Compatible with a range of dryer models...
This part is the replacement high-limit thermostat or safety thermostat for your dryer. The high-limit thermostat is found on the upper right-hand side of the heater housing, and it cuts off power to ...
This is a replacement O-ring for the drum bearing retainer on your dryer. The drum bearing is found at the back of the dryer drum. The O-ring is designed to create a seal on the drum bearing. The O-r...
This OEM replacement dryer slide bearing is white in color, and approximately 3 inches long. The slide bearings are supportive linings for your dryer. If they have eroded, or are damaged, the drums wi...
The door latch lid lock is to lock the door on your washer when the appliance is in use. Your washer will not start if your door is not locked. If your latch is broken, you may not be able to start a ...
This is a duct felt seal for a dryer. The duct felt seal allows the front-load dryer drum to glide smoothly on the front panel. Your dryer will not function properly if the drum felt seal is compromis...
No Longer Available
Questions And Answers for GUD27ESSM1WW
Ask our experts a question about this model and we'll get back to you as soon as possible!
57 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Thomas
November 17, 2022
The dryer will not start when hitting the button. nothing happens. the washer section still works fine. I checked the door switch and the button both have continuity. there is power to the dyer selection knob, when its n timed dry i can hear the time working but the dryer just won't start up.
For model number GUD27ESSM1WW
Hi Thomas, thank you for reaching out. We would recommend checking the following parts to fix the issue: High Limit Thermostat, part number PS267900, Interlock Switch, part number PS1481922, Dryer Cycling Thermostat, part number PS9863227, and Drive Belt, part number PS16542496. We hope this helps! If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.
My washer doesn’t agitate or spin. Water pumps in and out but it doesn’t agitate or spin.
For model number GUD27ESSM1WW
Hi Carol, thank you for reaching out. According to our research on the model, the Drive Belt appears to be faulty and you may need to replace it with part number PS16542496. If you need help placing an order, customer service is available 7 days a week. Glad to be of help!
Machine will complete all "Wash" cycles.... BUT.....regardless of the choice of "Load Selection", water will only fill to "small load" level.
Restricted to washing small loads.
For model number GUD27ESSM1WW
Hello John, thank you for your question. You may have ow water pressure or clogged water valve screens PS12343369. Or, it may be that the Load Size PS12343403 switch is defective. We hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Robert
June 23, 2025
Can I purchase and replace my heat element? There’s no heat coming into the dryer
For model number GUD27ESSM1WW
Hello Robert, thank you for reaching out. The heating element for your model comes in an assembly having part number PS3496850. Replacing it will most probably solve the problem. Glad to be of help!
Removed the front Dryer panel. Left drum in place and lifted it up slightly to get access to motor drive. Slipped belt in place and put panel back on. This was a first attempt ever at fixing an appliance and it was no big deal.
The end repair was very simple and took minimal effort. The time and difficulty was all in the testing. I disassembled the dryer and removed the drum and then hard wired each thermo-fuse to determine where the fault was. After test all of those I was stumped. When I opened the door the light would not come on so I assumed it was a power fault closer to the source. However after all of my testing I couldn't find anything wrong. I then removed the light bulb and realized it was burned out which led me to the door switch being the fault. I removed the switch and soldered the three wire together and the dryer started right up! All I had to do was order a new $15 part, unsolder the wires and plug them in. Would have been so much simpler if that light bulb hadn't of been burned out causing me to over think my diagnosis. This was my first major appliance repair and I did it with only the help of the parts diagram provided on the website.
I had to take most of the dryer apart because there is no rear access to the motor. It turned out to be easy to dissasembel the dryer. The only problem that I had was that I could not figure out how to route the belt around the motor and the idol pullies. I could not find anywhere that gave instructions on how to properly tension the belt. I finally figured out that the idoler pulley needs to be locked in place on the right side of the engie mount. Then the belt needs to be routed over idoler pulley and under the motor pulley. Finally release the idoler pully from the locked postion to put tension on the belt. It really turned out to be pretty easy.
