Looking to fix a leaky dishwasher? We've got you covered with our GE KIT - Piranha Clamps. Specially developed for GE dishwashers, these clamps are the superheroes of hassle-free connections. They are...
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
George
July 31, 2023
Dishwasher drains when starting the light cycle mode. Then fills normally. After that it will pause to drain, which now there is no "click" sound to drain.
And the dishwasher goes back to washing again.
For model number GPT225SGL0BB
Hello George, thank you for the question. Based on the description you have provided, we would recommend checking the turbidity sensor, part number PS12582726, to fix the issue. We hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Brent
February 28, 2025
The display doesn't power up. The display is blank, the circuit breaker didn't trip and outlet has power.
For model number GPT225SGL0BB
Hi Brent, Thank you for contacting us. This is normally an indication the User Interface Board PartSelect Number PS16554637 is faulty and may need to be replaced. We hope this is helpful!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Rita
December 25, 2024
The door on the detergent dispenser will not open during the cycle. What would cause this
For model number GPT225SGL0BB
Hi Rita, thank you for reaching out. Check to ensure that no large utensils or dishware are blocking the dispenser. If it is fine, the issue could be with the detergent module, part number PS12582695. You may need to replace it to fix the issue. We hope this sorts out your problem!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
I followed a YouTube video except I didn’t take the cabinet off. It wasn’t hard to feed the hose through. Only needed a Philips screwdriver. GE needs a more durable faucet connection because that is the part that fails within 2 years.
Tub gasket was not the issue, the lower spray arm corrected the fix! Took under two mins to pop off and replace and all was fixed. Very thankful for this site!
Gasket was verified to be good but found the lower spray arm cracked causing water to spray directly at door and leak out front of unit. Replaced arm and problem solved
