Struggling with a flooded dishwasher or water not draining correctly? The GE Drain Pump is just the solution you need. This essential component is at the heart of the draining process in your dishwash...
This dishwasher door latch assembly helps ensure the door closes and locks securely so the dishwasher can operate safely and properly. It is designed to correct common issues such as the door not latc...
Ask our experts a question about this model and we'll get back to you as soon as possible!
6 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Lorne
June 9, 2024
Dishwasher display was flashing while doing first part of quick wash cycle then turned off. Power to outlet is fine but no power to the display. Does this model have a thermal fuse and if so where is it located and how do I replace it?
For model number GPF400SGF1WW
Hello Lorne, thank you for contacting us. According to our research, your model does not have any thermal fuse. The issue is most probably with the power control board, part number PS12068998. You may need to replace it to fix the issue. We hope this helps!
Sounds like pump is running but no water going into unit. Troubleshoot please.
For model number GPF400SGF1WW
Hello Cindy, thank you for getting in touch. Make sure the water supply is on, and water pressure is not too slow. Check the water supply hose, the water supply hose can get kinked, blocking water flow. Inspect the water inlet valve, part number PS12311430. If the valve is blocked, clogged or there is debris, it can halt the flow of water. Also, check the water pressure switch, part number PS10063338. If this switch is faulty, it will not send the correct signal to the control board for water filling. We hope this helps.
Why is there condensation on the interior stainless steel door long after the dishwasher cycle. (ie. Like the next morning)
For model number GPF400SGF1WW
Hi Heather. It could be caused by leaving dishes inside too long. Some models just naturally have condensation and this is normal. I would contact the manufacturer for specifics about this model. Thank you for your question and good luck with your repair!
Was this helpful?
Thank you for voting!
Heather
January 11, 2020
Does this model have an air gap that i'm supposed to clean?
For model number GPF400SGF1WW
Hi Heather. We do not have much information for specific models. I would consult your manual or the manufacturer directly. Thank you for your question and good luck with your repair!
Was this helpful?
Thank you for voting!
Heather
January 11, 2020
Can this model be connected to the plumbing under the sink so i don't have to wheel it over each time?
For model number GPF400SGF1WW
Hi Heather. Please contact the manufacturer about this model. We have very little information about it other than the diagrams and part listings. Thank you for your question and good luck with your repair!
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
