GLEH1642FS4 Frigidaire Washer Dryer Combo - Overview
Sections of the GLEH1642FS4
[Viewing 9 of 9]
Manuals & Care Guides for GLEH1642FS4
Click to downloadInstall
Installation Instructions
(1.03MB)
Install
Installation Instructions
(3.53MB)
Manual
Owner's Manuals
(0.38MB)
Manual
Owner's Manuals
(2.52MB)
Care
Use and Care Manual
(0.3MB)
Wiring
Wiring Diagram
(0.4MB)
Keep searches simple, eg. "belt" or "pump".
Door Striker
PartSelect #: PS2378364
Manufacturer #: 131763302
This part is found on the door of your washer and keeps your door closed for use.
$43.07
In Stock
Order within the next 10 hrs and your part ships today!
Rear Drum Bearing Kit
PartSelect #: PS459829
Manufacturer #: 5303281153
This kit includes one bearing, one ball shaft, one ball bearing, one ball bearing retainer, a small tube of high temperature lubricant, and installation screws.
$57.02
In Stock
Order within the next 10 hrs and your part ships today!
Shock Absorber Kit
PartSelect #: PS3508101
Manufacturer #: 5304485917
This kit is used for front load washers and includes 2 dual-stage shock absorbers, 1 spare shock mounting pin and 4 locking nuts. These shock absorbers keep the washer from vigorous shaking during it's cycles.
$65.11
In Stock
Order within the next 10 hrs and your part ships today!
Front Load Washer Door Lock and Switch Assembly
PartSelect #: PS12364048
Manufacturer #: 131763256
This door lock and switch assembly is manufactured to lock the door on your front load washer to prevent it from opening while it is running. You may need to replace the door lock and switch if the do...
$184.79
In Stock
Order within the next 10 hrs and your part ships today!
Door Catch
PartSelect #: PS418433
Manufacturer #: 131658800
This part helps keep the door closed while the machine is running.
$75.04
In Stock
Order within the next 10 hrs and your part ships today!
Drum Support Bearing
PartSelect #: PS418807
Manufacturer #: 131825900
The rear drum support bearing helps support the dryer drum to rotate quietly and smoothly during operation. The bearing attaches on the inside of the rear panel of the dryer cabinet. If your dryer is ...
$12.62
In Stock
Order within the next 10 hrs and your part ships today!
Drain Pump - 60Hz 120V
PartSelect #: PS2342445
Manufacturer #: 137108000
This drain pump helps your washer get rid of water during the cycle. If your machine isn’t draining properly or leaves water behind, this part could be the fix. It’s made to fit many front-load models...
$246.55
In Stock
Order within the next 10 hrs and your part ships today!
Drum Glide - White
PartSelect #: PS5574052
Manufacturer #: 137513300
Appliance requires 2 .Sold individually.
$35.52
In Stock
Order within the next 10 hrs and your part ships today!
Thermal Limiter - Limit 220
PartSelect #: PS419402
Manufacturer #: 134120900
This thermal fuse limiter, with a limit of 220 degrees Fahrenheit, is manufactured for both gas and electric clothes dryers. Once the internal temperature of the dryer reaches 220 degrees, the heating element cuts out.
$15.17
In Stock
Order within the next 10 hrs and your part ships today!
Dryer Lint Screen
PartSelect #: PS12585473
Manufacturer #: 5304516871
This dryer lint screen is for laundry centers.
Dryer lint screen captures lint and debris from the exhaust air flowing from the dryer.
Follow the instructions in the owner's manual when installing this part.
$54.49
In Stock
Order within the next 10 hrs and your part ships today!
Lower Front Felt Seal with Adhesive
PartSelect #: PS832645
Manufacturer #: 5303937183
$36.73
In Stock
Order within the next 10 hrs and your part ships today!
Single Spring with Insulators
PartSelect #: PS735645
Manufacturer #: 134144700
$72.65
In Stock
Order within the next 10 hrs and your part ships today!
Questions And Answers for GLEH1642FS4
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jimmy
January 19, 2020
Motor will not run at all on washer everything else works
For model number GLEH1642FS4
Hello and thank you for writing.
It certainly sounds like it could be a faulty door lock and switch assembly PS12364048 and/or possibly a faulty drive motor itself PS1990829, you should check for signs of damage, and replace as necessary. We hope this helps. Please contact us anytime if you require further assistance.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Drive Motor
$486.78
Special Order
Front Load Washer Door Lock and Switch Assembly
$184.79
In Stock
Tara
December 6, 2022
I ordered a dryer belt I thought, but it is way to long and skinny the package says washer belt.
For model number GLEH1642FS4
Hi Tara, thank you for reaching out. According to our research, the dryer Drum Belt for your model is part number PS3408299. If you need help placing an order for it, please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Related Parts:
Multi-Rib Drum Belt
$17.05
In Stock
- < Prev
- 1
- Next >
Common Symptoms of the GLEH1642FS4
[Viewing 22 of 22]Noisy
Fixed by
these parts
these parts
Show All
Lid or door won’t close
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Door won’t close
Fixed by
these parts
these parts
Show All
Leaking
Fixed by
these parts
these parts
Show All
Will not drain
Fixed by
these parts
these parts
Show All
Marks left on clothes
Fixed by
these parts
these parts
Show All
Too hot
Fixed by
these parts
these parts
Show All
Locking Issues
Fixed by
these parts
these parts
Show All
Spins slowly
Fixed by
these parts
these parts
Show All
Drum Not Spinning
Fixed by
these parts
these parts
Show All
Will not agitate
Fixed by
these parts
these parts
Show All
Shaking and Moving
Fixed by
these parts
these parts
Show All
Not Heating
Fixed by
these parts
these parts
Show All
Spinning Issues
Fixed by
these parts
these parts
Show All
Door Pops Open
Fixed by
these parts
these parts
Show All
Won’t Start
Fixed by
these parts
these parts
Show All
Door latch failure
Fixed by
these parts
these parts
Show All
Burning smell
Fixed by
these parts
these parts
Show All
Not draining
Fixed by
these parts
these parts
Show All
Touchpad does not respond
Fixed by
these parts
these parts
Show All
No hot or cold water
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Broken Door Catch
This was one of the simpliest repairs I have ever done taking less than 5 minutes to complete. On the inner door I removed the two screws that hold the plastic catch in place. I then removed the broken catch and put the new catch in place. Finally I replaced the two screws that hold the catch in place and it was done.
Parts Used:
-
Joy from Columbia, MO
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
573 of 592 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door on washer wouldn't lock or start
1. Unplug unit.
2. Unscrew 2 nuts holding top in place in rear of unit using phillips head screwdriver.
3.Slide top back and remove.
4. Open door of washer and unscrew 2 screws holding in door lock unit.
5.Pull out unit from the top and install new unit reconnecting the 3 wire connections.
2. Unscrew 2 nuts holding top in place in rear of unit using phillips head screwdriver.
3.Slide top back and remove.
4. Open door of washer and unscrew 2 screws holding in door lock unit.
5.Pull out unit from the top and install new unit reconnecting the 3 wire connections.
Parts Used:
-
DOUG from KING FERRY, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
475 of 561 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
squeeking like crazy
well, i started at the top and worked my way down. by taking the top off, it gave me more room to get the dryer tub out. took the two screw`s out of the vented plate on the back of the machine to undo the belt. this is a stackable washer-dryer combo, so next i took off the white plate on front between washer & dryer. took off the control panel, unpluged it, then took dryer door front off. then removed the two screw`s that hold that bracket on ,in the back of dryer, pulled the drum out & replaced the belt, but before replacing anything i took the shopvac to it , there was alot of lint in there.when replacing the Grounding Ball Clip & Grounding Ball, i took a one inch by two inch magnet and used it to hold the Grounding Ball & Clip in place so i could get the two screws started in the Drum Support Bearing & Bearing Bracket. after installing that i put the shaft in place & lined the dryer tub up with the 3 screw hole`s ,and boom, bang, pow...nothing to it. it`s easy...parts came very fast....Thx PartsSelect.com...i`ve told all my friend`s about PartsSelect
Parts Used:
-
Steve from Wheelersburg, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Wrench set
134 of 160 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!