This water filter purifies water going to the water dispenser and sometimes the icemaker as well. This part should be replaced if it is causing reduced water flow or just replaced periodically per the...
This OEM Center Rail is a white plastic part which supports the crisper frame, which holds the crisper. Fifteen inches long and white in colour, if broken, the support may no longer hold properly. Re...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This light switch may also be known as a refrigerator door switch or a light switch kit, and is compatible with your refrigerator. The function of the refrigerator door switch is to turn on the light ...
This is a replacement pivot block for your refrigerator. It is made of white plastic and is approximately 4 inches long and 1 inch wide. The pivot block catches and holds the door mullion cover when y...
Sold individually. This door bin is for refrigerators.
Door bin attaches to the inside of the refrigerator door and typically holds jars and bottles.
Follow the instructions in the owner's manua...
$69.88
In Stock
Questions And Answers for GI6FARXXY07
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Lore
December 22, 2019
Ice maker not making ice. Have pulled out the bin but cannot find an on or off switch?
For model number GI6FARXXY07
Hello Lore, Thank you for the question. The ice maker does not come with an on off button. The Arm on the ice maker (not the bucket) tells the ice maker when to fill with water and dump the ice into the bucket. I suggest checking the arm to be sure it is not stuck in the off position. Hope this helps!
Was this helpful?
Thank you for voting!
Bill
December 16, 2022
no water going to ice maker or dispenser in door
For model number GI6FARXXY07
Hello Bill, thank you for contacting us. The issue is most probably related to a clogged water filter, part number PS11722130, and/or a defective water inlet valve, part number PS11755669. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!
Water dispenser sticks and comes on randomly. It flooded our kitchen as we slept. We turned the water off to the fridge but it’s loud and still trying to dispense water
For model number GI6FARXXY07
Hello Nancy, thank you for the question. Based on our understanding of the issue, we would suggest you checking the dispenser actuator kit, part number PS11753827, to fix the issue. We hope this helps!
Pressed in the end of the filter cover, lowered it down part way. Twisted the old filter 1/4 turn and removed it. Set in the sink to drain. Inserted new filter and twisted it to lock. closed cover. Done. Total time @ 1 Minute.
I knew the chances of all the freon leaking out was unlikely so I looked at the wiring to the compressor and there was a capacitor and a starter/overload so i figured I would start there. I went on line and found the parts at this site and they were less than the minimum service call charge for a service tech so I figured what the heck let's give her a shot so I did give it a shot. I ordered the parts and they were there in less time than a service tech could come out and i installed the parts and guess what for 90.00 in parts and 15 minutes in time I repaired my refrigerator. Thanks guys, It took less time to order the parts than it did to make the repair so thanks, your website rocks and is very well designed so my hat is off to you guys!
I removed the drop-down outer housing by gently prying the sides of the two pivot pins at the rear. This gave me move 'room' to grip and slightly rotate then pull the old filter forward and away from the tight suction connection. I was concerned that I would be too forceful for the plastic assemblies and would break something; deliberate motions and a steady thought process on the problem helped disengage the darned old filter!