This water filter purifies water going to the water dispenser and sometimes the icemaker as well. This part should be replaced if it is causing reduced water flow or just replaced periodically per the...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This compressor start relay is for refrigerators. The compressor start relay attaches to the compressor and helps start the compressor motor. Safely store any food that could deteriorate while the pow...
This light switch may also be known as a refrigerator door switch or a light switch kit, and is compatible with your refrigerator. The function of the refrigerator door switch is to turn on the light ...
This is a replacement pivot block for your refrigerator. It is made of white plastic and is approximately 4 inches long and 1 inch wide. The pivot block catches and holds the door mullion cover when y...
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
This part is the replacement water filter cover for your refrigerator. The cover protects the water filter to prevent damage. If the water filter cover is cracked or missing, you should replace it. It...
$91.73
In Stock
Questions And Answers for GI5FSAXVY00
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
JOHN
June 24, 2021
My Whirlpool refrigerator is not getting cold in freeze nor main compartment of unit. What could be wrong? Is there something i could try before calling on a service tech? Thx john
For model number GI5FSAXVY00
Hi John,
Thank you for your question. If the refrigerator and freezer sections are too warm, there are some parts that you will need to check to see which one is causing the issue. You will need to check the capacitor, the compressor start relay, the thermistor and both the evaporator and condenser fan motors. We hope this helps! If you have any questions, please let us know.
Where is the thermostat on my Whirlpool gi5fsaxvy00 located? Are there more than one? Thx john
For model number GI5FSAXVY00
Hi John,
Thank you for your question. There are 2 thermistors located in your refrigerator, one in the freezer section and the other in the refrigerator section. These are usually located along the side walls. Sometimes the one in the refrigerator section may be in the control box. The defrost thermostat is located with the defrost heater near the evaporator coils behind the freezer wall. We hope this helps!
WATER AND ICE DISPENSER ON DOOR WORK SPORATICALLY, ONE OUT BOTH OUT?
For model number GI5FSAXVY00
Hi Thomas, thank you for reaching out. We have researched your model and found that if the ice dispenser and water dispenser both stopped working at the same time, then the most likely issue is with the water filter, part number PS11722130. If this does not help, then you need to replace the water inlet valve, part number PS2069865. We hope this helps! If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.
Will not dispense ice nor water. Tech wrote estimate and said "Control Board logic failure" and wrote KW2507851 (I don't know if that's a part number?)
For model number GI5FSAXVY00
Hello Julie, thank you for your question. The board is PS11752535. We are pleased to have been able to help.
Pressed in the end of the filter cover, lowered it down part way. Twisted the old filter 1/4 turn and removed it. Set in the sink to drain. Inserted new filter and twisted it to lock. closed cover. Done. Total time @ 1 Minute.
I knew the chances of all the freon leaking out was unlikely so I looked at the wiring to the compressor and there was a capacitor and a starter/overload so i figured I would start there. I went on line and found the parts at this site and they were less than the minimum service call charge for a service tech so I figured what the heck let's give her a shot so I did give it a shot. I ordered the parts and they were there in less time than a service tech could come out and i installed the parts and guess what for 90.00 in parts and 15 minutes in time I repaired my refrigerator. Thanks guys, It took less time to order the parts than it did to make the repair so thanks, your website rocks and is very well designed so my hat is off to you guys!
I removed the drop-down outer housing by gently prying the sides of the two pivot pins at the rear. This gave me move 'room' to grip and slightly rotate then pull the old filter forward and away from the tight suction connection. I was concerned that I would be too forceful for the plastic assemblies and would break something; deliberate motions and a steady thought process on the problem helped disengage the darned old filter!