This is the replacement water valve for your washer. It has 2 inlets and 3 outlets. The water valve connects to the water source and solenoid wires, and ensures the tub has the right amount of water e...
Ask our experts a question about this model and we'll get back to you as soon as possible!
9 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ross
August 12, 2021
Washer not powering on any more. Main fuse checked ok, cable checked okay. Thanks
For model number GFW430SSM1WW
Hello Ross, Thank you for the question. If the appliance is getting power and the fuse and cable check out to be good, you may have a defective User Interface Board. We hope this helps!
Was this helpful?
Thank you for voting!
Leepor
October 18, 2021
Why my GE front washer not spin and keep pauses? How do reset or fix it?
For model number GFW430SSM1WW
Hello Leepor, thank you for your question. First, make sure the drain hose is not kinked and unplug your washer. A defective lid switch assembly could be causing the problem. You can test the lid switch with a multimeter. Set your multimeter to the lowest ohms of resistance and test your lid switch. If it does not read any continuity, then your lid switch is indeed faulty. Part number PS11699522. We hope this helps.
The door glass shattered, do i need to order the whole door panel or just the glass door. can you recommend a repairman to i stall or replace this glass door.
For model number GFW430SSM1WW
Hello Jonathan, thank you for reaching out. You will only need to replace the door glass on your washer if it is broken. The part number for the door glass is PS12171701. We have attached a relevant video to assist you with the door glass replacement by yourself. If you require assistance to place an order, please contact customer service. We hope that helps!
Was this helpful?
Thank you for voting!
Mingo
February 7, 2023
I HAVING PROBLEM WITH CONTROL BRAOD IT WILL NOT SHOW NOT LIGHT AT ALL
For model number GFW430SSM1WW
Hello Mingo, thank you for reaching out. We suggest checking the wiring to the Control Board, part number PS12343361 to make sure everything is secure and no damage. If the wiring is good, you may need to replace the Control Board. We hope this solves your problem!
Was this helpful?
Thank you for voting!
DOMINGO
February 7, 2023
hello i would like to no was the control braod stay on went it off
For model number GFW430SSM1WW
Hello Domingo, thank you for contacting us. If your control board is staying on after the washer is off, the issue is probably related to a faulty UI board, part number PS12343361. It manages the washer's functions such as filling, washing, draining, and spinning. We hope this is what you were looking for!
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
I called a repair person to check my 15 months old GE front loader washer that stopped in rinse mode. After his inspection he said it was a deffected computer board and it would be very expensive to replace the 3 computers boards inside and it would be cheaper to buy a new top loader washer. The next day I lifted the top cover and found a taped plastic envelope with instructions titled “For service Technicians Only." On page 2, instruction on to how to enter the washer in to service mode and to test the washer: Press : Signal, Delay, Signal, Delay (within 30 seconds of plug in washer) Then rotate main knob to #102 and press Start:(the washer did a test for finding the problem) , and for me was : E22 , it means : replace solenoid valve assembly. So I order the part from Partselect.com for $58.00 and my Washer runs beautiful, thanks to the instructions inside.
Removed three 7mm sheet metal screws from the bottom front panel. The drain pump is in the front right. Removed the manual drain screen to drain residual water from the system. A bucket was necessary to collect all the water. Disconnected the inlet and outlet hose. Disconnected the electric supply. Removed two Phillips screws holding the pump to the bottom of the machine. Slid the pump towards the rear to clear the support pegs and removed it from the front opening. Installation is the reverse of those steps.
