This NSF-certified refrigerator water filter is engineered to improve the taste, clarity, and safety of your drinking water by reducing contaminants such as mercury, lead, and trace pharmaceuticals. D...
This OEM-compatible screw is designed for use with many GE dishwashers. Measuring 8-16 HXW and 1/2" in length, this stainless steel screw secures the middle spray arm hub to the upper rack assembly, e...
This is a door handle fastener to secure the handle to your refrigerator drawer. It is also known and a mounting bolt or screw. It is approximately 1 inch in total length, and is made of metal.
Fix a freezer door that won’t close properly with this genuine spring hinge mullion. It keeps the flipper seal tight, preventing warm air from entering and helping maintain the right temperature. If y...
The Refrigerator Evaporator Fan Motor is an OEM replacement part for some GE refrigerators. It is responsible for circulating air over the evaporator coils, which are responsible for cooling the refri...
This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer. This part has been updated by the manufacturer and may appear different t...
This door shelf bin is an authentic OEM part sourced directly from the manufacturer. It is designed for use in your GE refrigerator. It is made of white and clear plastic, and houses items on your ref...
Keep your refrigerator’s crisper drawer in top condition with this replacement vegetable pan glass. It offers a clear, durable surface for storing fruits and vegetables, and fits securely above the dr...
We've got just the right thing for your refrigerator troubles: the GE Stainless Steel Paddle Cover. This simple little piece is the backbone of your fridge's dispenser lever system. Have you ever ta...
Is your GE refrigerator in need of a little repair? Our Left Hand Ice Door Mid Bin is just what you need. Designed specifically for GE refrigerators, this sturdy bin fits neatly inside your refrigerat...
If your fridge is building up too much frost or not cooling evenly, this defrost thermostat might be the issue. It helps control the temperature during the defrost cycle by shutting off the heater whe...
$37.95
Special Order
Questions And Answers for GFE28GSKHSS
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ryan
December 16, 2019
Why are the lights flickering and going out inside my fridge?
For model number GFE28GSKHSS
Hello Ryan, thank you for your question. The issue could be with the light switch, PartSelect Number: PS12295821. If that part is replaced and doesn't fix the issue, the light itself should be replaced next. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Thad
March 26, 2020
My freezer was working fine, but the fridge was running at about 60 degrees so i researched here and purchased a GE refrigerator temperature sensor. When i located the existing one attached to the coils, it was a single, larger cable compared to the two cable GE replacement part. Before i cut the cable on the existing sensor, i want to make sure the thicker cable should contain two wires as well.Thanks in advance.
For model number GFE28GSKHSS
Hello Thad, thank you for your question. There should be two wires coming from the wires of the old sensor which are connected to the two wires on the new sensor which is PartSelect Number PS304103. The old sensor should not have one cable, but two. I hope this helps.
Was this helpful?
Thank you for voting!
Dennis
February 20, 2023
The largest/widest climate zone bin is freezing food and sodas and has frost in the back lefthand side. What could this be? We have the refrigerator set at 38F and freezer is 5F.
For model number GFE28GSKHSS
Hi Dennis, thank you for reaching out. First, you need to make sure that the food is not placed directly next to the cold air vent. Then, you may need to check the thermistor, part number PS304103. To determine if the thermistor is defective, test it with a multimeter. The thermistor resistance should change in conjunction with the refrigerator temperature. If the thermistor resistance does not change or the thermistor does not have continuity, replace the thermistor. If it is not faulty, then the issue is most probably with the evaporator fan motor, part number PS12727431, because if the evaporator fan motor is malfunctioning, the cold air from the freezer or refrigerator evaporator coils can migrate through the air ducts to the bottom of the refrigerator and freeze the food. You should try rotating the evaporator fan blades to see if they spin freely. If not, it is likely the motor bearings have seized and the motor will need to be replaced. You can also use a multimeter to test the motor for electrical continuity. If the motor has no electrical continuity, the component will not run, and a new motor will need to be installed. If that does not help, you may need to check the defrost thermostat, part number PS8688283. A faulty defrost thermostat may not allow voltage to reach the defrost heater, resulting in the evaporator coils frosting over and causing a loss of airflow and cooling. To determine if the defrost thermostat is defective, use a multimeter to test it for electrical continuity. We hope this information is useful!
My GE Fridge shows the temperature set point. How can I get the actual temp ready?
For model number GFE28GSKHSS
Hi Ray, thank you for your inquiry. To change the temperature, press either the Freezer or Fridge pad until the desired temperature is displayed. We hope this information helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
I went to a GE repair center to explain my problem, the service center reccomended that I have a techinician come out o look at it. $75.00 for the visit and what ever labor and materials wuld cost.
I went on line to see if there were others having this same problem and found that there were many with the same problem.
After reading some of the ways that people found out what was wrong ...it became a matter of three components, the timer, heater or thermostat.
I tried the most common component and the less expensive one first , the thermostat switch I installed it very easily snipping two wires and attaching the news using wire nuts I used the diagram on this website to pinpoint the component and there has not been a problem since.
went to your website and viewed exploded view to find the sensor( there are two I just picked one to replace for now), pried the cover off carfully and pulled out the sensor. I snipped the wire in the middle leaving plenty to work with. I shortened the wire on the new piece, spliced the wires together and with some 3M rubberized, tape wrapped them up, replaced the sensor back into the cover and snapped in place.
