GDF535PGR5CC General Electric Dishwasher - Overview
Sections of the GDF535PGR5CC
[Viewing 6 of 6]
Keep searches simple, eg. "belt" or "pump".
Dishwasher Lower Rack Roller
PartSelect #: PS16217024
Manufacturer #: WD12X26146
The lower rack roller supports the smooth sliding of your dishwasher’s bottom rack. Measuring 1.5 inches in diameter and charcoal-colored, this OEM replacement part is sold individually. Replace all f...
No Longer Available
Screw
PartSelect #: PS283515
Manufacturer #: WR01X10065
Size: 10-32 GXTT FLP .595
Sold individually.
$13.95
Special Order
RACK CARRIER AND ROLLER KIT
PartSelect #: PS17873321
Manufacturer #: WD01X35298
- Includes: 4 brackets, 4 roller wheel brackets, and 8 wheels part # WD12X26146
Dishwasher Lower Dishrack Carrier and Roller Kit (Set of 4). This kit will replace all four one piece roller carriers w...
No Longer Available
Hex Head Screw 10-32 GX HXW 3/8
PartSelect #: PS8688150
Manufacturer #: WD02X10220
If you're looking to get your dishwasher working like new, then look no further than the GE Hex Head Screw. This handy little item ensures your dishwasher runs efficiently and smoothly in the long run...
$13.95
Special Order
LOWER SPRAY ARM
PartSelect #: PS17137081
Manufacturer #: WD22X33499
This genuine part fits perfectly and no longer requires a heatshield. Keep your dishes spotless with this lower spray arm assembly, designed to spray water and detergent throughout the wash cycle. Loc...
No Longer Available
UPPER RACK
PartSelect #: PS18351367
Manufacturer #: WD28X35779
This dishrack is for dishwashers. The dishrack holds the dishes in place during the dishwashing cycle. Follow the instructions in the manual when installing this part.
No Longer Available
EXTENSION DRAIN HOSE
PartSelect #: PS17873549
Manufacturer #: WD24X34763
This extension drain hose provides added length and flexibility for proper drainage routing. Secure flow helps prevent leaks and backups. Replacing a damaged hose restores reliable drainage and installation flexibility.
No Longer Available
Dishwasher Tub Gasket
PartSelect #: PS11774412
Manufacturer #: WD08X23476
The tub gasket, also known as the door gasket runs along the perimeter of your dishwasher basin and creates a seal that prevents water from leaking out when the tub is full. If you notice water on the...
No Longer Available
Questions And Answers for GDF535PGR5CC
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the GDF535PGR5CC
[Viewing 10 of 10]Leaking
Fixed by
these parts
these parts
Show All
Not cleaning dishes properly
Fixed by
these parts
these parts
Show All
Noisy
Fixed by
these parts
these parts
Show All
Not draining
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Not drying dishes properly
Fixed by
these parts
these parts
Show All
Door latch failure
Fixed by
these parts
these parts
Show All
Will not fill with water
Fixed by
these parts
these parts
Show All
Will not dispense detergent
Fixed by
these parts
these parts
Show All
Door won’t close
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Spray arm had become unattached and burned by the heat element
It was a simple as: attach and done!
There is a ring on the part that tightens clockwise to the nipple that sprays out the water that it rests on. Twist clockwise and you are done!
It is a mystery how it was unattached to begin with but not a problem in the end, it was easy to fix!
Thanks for sending genuine GE parts!
There is a ring on the part that tightens clockwise to the nipple that sprays out the water that it rests on. Twist clockwise and you are done!
It is a mystery how it was unattached to begin with but not a problem in the end, it was easy to fix!
Thanks for sending genuine GE parts!
Parts Used:
-
Mark De from BRONX, NY
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
15 of 17 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
A slow drip from the pump area.
Replaced floating seal. Un plugged and Pulled washer out from the counter and laid on its left side. Pull pump out of seal by hand. Straight screwdriver to lever seal out of fitting. Clean hole and wipe seal then push into hole. Reinsert pump reverse install.
To make it easier I previously extended the water supply hose to nearly 8 feet so did not have to disconnect it.
To make it easier I previously extended the water supply hose to nearly 8 feet so did not have to disconnect it.
Parts Used:
-
Joseph from Waldorf, MD
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver
13 of 15 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The service rack vinyl coating had worn off on the rails on the bottom resulting in the metal being exposed and rusted.
Could not do the repair. The incorrect service rack was shipped. It was a different model than what was ordered. It was a different size and would not fit. Had to ship it back at my own expense. Service rack was $77.03 and that has been reimbursed. The return shipping cost to me was $43.75. That expense still has not been reimbursed. I do not want to risk ordering another service rack and risk having to go through the same type of service again.
Parts Used:
-
Susan from OAKDALE, PA
-
Difficulty Level:Very Difficult
-
Total Repair Time:More than 2 hours
13 of 16 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!