This is an end cap for a dishwasher rack. This part is about 2.5 inches long, is black, and is made of plastic. You may need to replaced this part if it is broken, or if your dishwasher rack continuou...
This OEM-compatible screw is designed for use with many GE dishwashers. Measuring 8-16 HXW and 1/2" in length, this stainless steel screw secures the middle spray arm hub to the upper rack assembly, e...
This is replacement door latch for your dishwasher. The door latch is attached to the tub frame, and connects to the door strike to keep your dishwasher door closed during operation. If you have a bro...
This kit includes the lower and middle spray arms. Water is forced through this spray arm by the unit's pump and motor assembly. The force of the water propels the spray arms, spraying water and deter...
Looking to fix your dishwasher and get it back to cleaning your dishes like a champ? Your solution could be the GE Conduit Mid Assembly. This important part, also known as the spray arm manifold, firm...
This diverter valve assembly controls water flow between the upper and lower spray arms in compatible dishwashers, ensuring efficient cleaning during each cycle. Located inside the appliance, it direc...
This drain pump kit is designed to remove dirty water from your dishwasher during and at the end of each wash cycle. If you’re noticing standing water after a cycle or leaks beneath the appliance, the...
The lower rack roller supports the smooth sliding of your dishwasher’s bottom rack. Measuring 1.5 inches in diameter and charcoal-colored, this OEM replacement part is sold individually. Replace all f...
This dishwasher latch strike is a manufacturer-approved replacement part for your appliance. The latch strike is an important component in your dishwasher door assembly, and adds an extra layer of sec...
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Lee
October 6, 2023
Control lights not on. It's like there's no power. Checked power to dishwasher and it is on?
For model number GDF530PGM0CC
Hello Lee, thank you for reaching out. Based on our understanding of the issue, we would suggest resetting the dishwasher by unplugging it and then plugging back in after 1 minute. If the issue still occurs, then you may need to check the user interface board, part number PS16762507, to fix the issue. We hope this solves your problem!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Sylvia
March 29, 2024
What is length of wash cycle. It runs now at over one hour which I feel is exceptionally long.
For model number GDF530PGM0CC
Hello Sylvia, thank you for your inquiry. According to our research, your model has 4 wash cycles. The auto sense cycle time ranges from 1 hour 50 minutes to 2 hours 5 minutes. The heavy wash cycle time ranges to 2 hours 30 minutes. The Normal wash cycle time ranges from 1 hour 15 minutes to 1 hours 45 minutes. The 1 hour wash cycle time ranges to 50 minutes. We hope this information helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Max
February 4, 2023
Not drying no hot water
For model number GDF530PGM0CC
Hello Max, thank you for reaching out. We recommend testing the heating element, part number PS16659472. Touch the red multi-meter lead to one heating element terminal and the black lead to the other terminal. If the meter displays a reading between 10 and 50 Ohms of resistance, the heating element has continuity and should be working properly. You can also check the dispenser to make sure the Jet Dry Agent is being dispensed properly. We hope this solves your problem!
Was this helpful?
Thank you for voting!
Soraya
April 10, 2023
My dishwasher won’t turn on????
For model number GDF530PGM0CC
Hello Soraya, thank you for contacting us. Your dishwasher is not turning on because of a faulty door latch, part number PS6447681. Good luck with the repair!
Hello Theodore, Thank you for reaching out. If the Outlet and Breaker were both checked and confirmed operational, we suggest checking Control Board Fuse. We hope this helps, good luck with the repair!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Took off the kickplate, diconnected the wires and removed the whole door by lifting straight up, removing spring wires from hinges. Once door is disconnected from the machine, removed one hinge by removing bolt. Slid gasket into place, secured hinge back in place, then reconnected wires at bottom, replaced hinge spring wires and slid door back down onto hinges. Now that we know how to do it, could do it in 15 min to half hour.
This didn't work out well. At the beginning of September the control panel in the door started to work erratically, the lighted buttons did not light up as expected. I ordered a replacement board and installed it. CONFIGURED UI SERVICE CONTROL Part #: PS16618944 This did not help, so I ordered another control board and installed it. CONFIGURED SERVICE MACHINE CONTROL BOARD Part #: PS16226072. This did not help. This control board has a small orange fuse that looks like an old fashioned transistor. it was fine, as was the fuse on the previous control board. There were two things about the Control boards that might help someone figure out what went wrong. When I took out the original control board, there was evidence of component overheating. When I installed the new control board there was a green light that was blinking. I had hoped to complete this repair, but we have been without a dishwasher for over a month, so I bought a new one. (I am a competent Instrumentation and Controls technician) It could be that there is a bigger issue here; a major component failure. If anyone has some suggestions to try, I would like to repair the machine and sell it as a used appliance.
this was ordered 4-9-21 and I have yet to receive it. Its difficult to explain the installation when you haven't received the main part. I paid for this but you have not shipped it. Very poor customer service.
