This is a flood switch assembly for your washer. The flood switch controls the hot and cold water filling your washer tub to ensure the proper amount of water. You may need to replace this part if you...
This is an end cap for a dishwasher rack. This part is about 2.5 inches long, is black, and is made of plastic. You may need to replaced this part if it is broken, or if your dishwasher rack continuou...
This is replacement door latch for your dishwasher. The door latch is attached to the tub frame, and connects to the door strike to keep your dishwasher door closed during operation. If you have a bro...
This drain pump kit is for dishwashers. The drain pump kit removes the water from the dishwasher tub during the drain phase of the dishwashing cycle. The kit may include multiple parts; refer to your ...
This is a genuine GE dishwasher leveling screw. It operates as a leg on the bottom of your dishwasher, and can be screwed in and out to raise and lower the height of the dishwasher. It is made of meta...
This is a lower rack roller for your dishwasher. It attaches in the lower roller assembly on the bottom of your rack to allow the rack to smoothly slide in and out. This replacement part is 1.5 inches...
This part is the replacement door hinge cable for your dishwasher. The door hinge cable connects the door spring to the door hinge, and allows the door to drop down slowly when it is opened. If you op...
$18.42
Special Order
Questions And Answers for GDF520PGJ0BB
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Don
July 12, 2021
Water comes in and pumps out fine. The spinning arms do not spin while cleaning. There are no clogs in the spinner arms. I’ve run water through them at the sink. While running we always heard the spray from the arms. Now we hear nothing. The washer is now silent except while pumping out water. Does this indicate a bad pump? Which part number? Is there a test I can run to confirm?
For model number GDF520PGJ0BB
Hello Don, Thank you for the question. This normally indicates a defective Circulation Pump. This pump circulates the water to the arms during the wash cycle. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Rick
August 16, 2021
Does the bottom dish reck with wheels come in gray? What is the part number
For model number GDF520PGJ0BB
Hello Rick, thank you for your question. The bottom dishrack, part number: PS12743260 is white with grey wheels. I hope this helps!
Was this helpful?
Thank you for voting!
Ruby
March 16, 2023
Does this rack come without the silverware basket?
For model number GDF520PGJ0BB
Hi Ruby, thank you for contacting us. Yes, the lower rack assembly comes with a silverware basket, part number PS16618974. If you need help placing an order, customer service is open 7 days a week!
Was this helpful?
Thank you for voting!
Gary
December 16, 2023
How do you replace the bottom door gasket on this model?
For model number GDF520PGJ0BB
Hi Gary, thank you for the question. We have attached a video, which may not be of the exact part or model, but it will give you an idea of how to replace this part. We hope this is helpful!
Was this helpful?
Thank you for voting!
Brian
January 27, 2024
Looking to purchase lower rack for my dishwasher, could you please contact me with assistance, TY!!!
For model number GDF520PGJ0BB
Hello Brian, thank you for contacting us. According to our research, the lower dish-rack does not come individually, it comes with the silverware basket. The lower dish-rack assembly is part number PS16618974. We look forward to hearing from you if you need assistance with placing an order through our 7-days-a-week customer service!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Took off the kickplate, diconnected the wires and removed the whole door by lifting straight up, removing spring wires from hinges. Once door is disconnected from the machine, removed one hinge by removing bolt. Slid gasket into place, secured hinge back in place, then reconnected wires at bottom, replaced hinge spring wires and slid door back down onto hinges. Now that we know how to do it, could do it in 15 min to half hour.
We tried cleaning out the filter and it clogged with a huge amount of gunk. We removed the gunk, scrubbed the filter, and tried running the dishwasher, but still no water. That took over an hour (not counting the time the dishwasher spent running). Then we tried your diagnosis center and it pointed to the flood switch or the water valve. I extracted the flood switch (another 30-60 minutes) to check it, and it also contained gunk and (significantly) did not rattle, which made me suspect the flood switch was the problem, so I ordered one. Once the replacement arrived, I checked it and the flood switch rattled, confirming that it should work properly. I spent 30-45 minutes installing it, plus the filter assembly and racks I had to remove to access it. Ran the dishwasher and everything came out sparkling clean. I don't know where the gunk came from, but if you aren't getting water and the filter is full of gunk, check the flood switch.
1. Turn off breaker supplying power to dishwasher in electrical panel 2. Open dishwasher door 3. Unscrew the screws that secure the dishwasher to the counter. 4. Tip dishwasher forward. Identify the non-functioning door latch. It looks exactly like the replacement. Unclip the wire harness from the door latch. 5. On the inside of the dishwasher, there are 2 screws directly under the door latch. Unscrew them and carefully set aside. 6. Remove old door latch. 7. Set new door latch in place. Holding securely, replace screws removed in step 5. Toward the end they get a little tougher to screw in. 8. Plug wire harness into new door latch. 9. Re-align dishwasher and re-secure to counter in previous position. 10. Test latch to make sure it closes properly. 11. Turn on breaker in electrical panel. The dishwasher should now function properly.
