Experiencing issues with your oven light not switching off? We have the solution for you. Our OEM Frigidaire Oven Door Light Switch is a quandary solver. This genuine piece is perfect for specific Fri...
Give your oven a fresh, clean look with this outer door panel. Made of stainless steel and glass, it’s built to handle high heat while keeping your kitchen looking sharp. It replaces the front part of...
Here's a straightforward solution to a common microwave problem? our Glass Round Tray is specifically crafted by Frigidaire to help your microwave work better and more efficiently. It's more than just...
This right-hand safety interlock assembly is designed to help ensure safe operation by preventing the appliance from running if the door is not fully closed and properly latched. Commonly used in oven...
$108.51
In Stock
Questions And Answers for GCWM3067AFB
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Josué
August 28, 2025
Í need be sure is outer glass
For model number GCWM3067AFB
Hello Josué, thank you for getting in touch. According to our research, the outer door glass, part number PS16555908, is compatible with your model number. We hope this helps.
PF alarm appeared on display. Noticed clicking when cord was moved. Had arced for some time and melted original block. New part slightly different. Only has 3 lugs, old one had six. Stack using washers provided. Take note of colors before disassembly. Use caution while working through access opening. The edges are sharp. Only tools needed are phillips screwdriver, deep socket for lug nuts. Nut driver optional. Hope this is helpful.
Removed the wires that I could, then terminal block. Installing the new terminal block was very easy; however the wires that arced were fused to the terminal bock screws and needed to be cut and new connectors had to be put on the wires to allow them to be reattached to the block safely. Once all was replaced and reinstalled the oven has worked great. The length of the repair was increased because of the melted parts and having to run to the store to get the new wire connectors big enough to fit on the wires. If we were simply replacing the block and had not encountered the melted ends, it would have been a very quick and easy repair.
