This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This manufacturer-certified Pan Slide Track allows the drawer to slide in and out. It measures roughly 12 inches in length If this track is damaged or missing, you won't be able to move the drawer pro...
This icemaker can be used with 25-27 cubic feet refrigerators that have a vertical auger dispenser located on the freezer door. Reuse bottom bracket from the original icemaker and attach to the new.
This twenty-five watt microwave light bulb is two and a half inches long. It has a small, screw-in base and it carries 120V. This item sells in a quantity of one, though many microwaves require two.
This set of two electronic control boards contains both the emitter and the receiver. These boards tells the icemaker when it's full and that it has to dump the ice, and it also tells the icemaker whe...
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bob
September 21, 2023
How to turn off water to icemaker?
For model number GC3NHAXVY01
Hello Bob, thank you for the question. You would turn off the water going to the refrigerator. If you want to turn off the ice maker, the On/Off switch is on the top right-hand side of the freezer compartment. To manually turn off the ice maker, slide the control to the OFF (right) position. We hope this information helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Tom
February 1, 2024
The fridge cycles off and on frequently, like every 2 minutes. What's wrong?
For model number GC3NHAXVY01
Hello Tom, thank you for contacting us. Based on the description that you have provided, we would recommend checking the thermistor, part number PS11739132, to fix the issue. It senses the refrigerator temperature and sends a corresponding voltage to the control board. If it is malfunctioning, it will cause the control board to cycles the refrigerator off and on frequently. We hope this helps.
Are two thermistors in Freezer and in refrigerator the same? What is the part number or compatible part number?
For model number GC3NHAXVY01
Hi John, thank you for getting in touch. Your model comes with only one thermistor. The compatible thermistor for your model is part number PS11739132. If you need help placing an order, customer service is open 7 days a week!
The old tracks had been falling out consistently, causing the deli tray to fall on top of the food below it (which included the eggs, though none were broken since they were in a hard plastic container).
I had some difficulty getting the new track installed, however. All the parts lined up, but I just couldn't get the tracks to slide into place. After some brute force and about 10 minutes, they were finally installed.
Best thing about it is that it doesn't appear that these tracks are coming out easily! Mission accomplished!
Remove the icemaker service door... gently pry the door pins from the hinge sockets. Remove the 3 screws from the under side of the icemaker with a nut driver (1/4"). Gently remove the icemaker . It's a tight fit between the top of the compartment and the icemaker lower support tray. Next, disconnect the electrical connector at the right side. You're done! Reverse procedure for installing. Good luck. Remember, your working with cold plastic...take your time and don't force too much.