FUF14DMCRWH General Electric Freezer - Overview
Sections of the FUF14DMCRWH
[Viewing 3 of 3]
Keep searches simple, eg. "belt" or "pump".
Defrost Thermostat
PartSelect #: PS303451
Manufacturer #: WR50X10031
The thermostat senses that the heat near the cooling coils has reached the desired temperature.
No Longer Available
Evaporator Fan Motor
PartSelect #: PS304606
Manufacturer #: WR60X10014
This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated.
No Longer Available
Secondary Gasket
PartSelect #: PS3513027
Manufacturer #: WR14X10314
GASKET, SECONDARY
No Longer Available
Questions And Answers for FUF14DMCRWH
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the FUF14DMCRWH
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The freezer door was catching when opened and frost was building inside telling me that the seal wasn't good.
I called the local GE dealer for repair. The repair person arrived and told me that he could not get the part. The freezer was too old. Then he charged me $60 for coming out. I went online and did a search for parts with the model number above. I found Partselect.com and the diagrams showed which part I needed. It was in stock and I ordered it. My husband and I removed the door to the freezer, pushed the part into the hole at the bottom of the door and put the door back on its hinges. It works perfectly. Thank you.
Parts Used:
-
Paulette from Great Falls, MT
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
15 of 19 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
freezer kept icing up on the coils would only get down to 20 degrees.
unplug the freezer. remove the 2 screws holding the timer, unplug the electrical fitting w/4 prongs. reverse the steps and you are done.
Parts Used:
-
Jerry from Elverta, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
4 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!