This manufacturer-approved air filter system for refrigerators eliminates odors and any impurities. It does this by neutralizing and removing odor-causing molecules. For best results, it is important ...
$45.61
In Stock
Order within the next 4 hrs and your part ships today!
This refrigerator and freezer door gasket is a genuine OEM replacement part designed for select models from Frigidaire, Electrolux, Kenmore, and other affiliated brands. Measuring approximately 31.3 i...
$247.35
In Stock
Order within the next 4 hrs and your part ships today!
Keep your deli items fresh and easy to reach with this replacement refrigerator drawer. It’s perfect for storing meats, cheeses, and other snacks, and it slides in and out smoothly so you can grab wha...
$234.75
In Stock
Order within the next 4 hrs and your part ships today!
If your fridge’s crisper drawer is missing its top glass or the current one is cracked, this clear glass insert is a great replacement. It sits right above the drawer, giving you a sturdy surface for ...
$163.61
In Stock
Order within the next 4 hrs and your part ships today!
This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated.
$80.07
In Stock
Order within the next 4 hrs and your part ships today!
This is a temperature sensing mechanism. It can sense the rise in evaporator temperature during a defrost cycle and cycles the defrost heater off after all frost is melted from the coils.
$91.79
In Stock
Order within the next 4 hrs and your part ships today!
This door bin is for freezers.
Door bin stores items in the door of the freezer.
Follow the instructions in the owner's manual when installing this part.
Sold individually.
This is a genuine part. The handle mounting shoulder screw (no.10 ab) is made for use with many refrigerators. The metal screw helps to fasten the handle assembly to the outer do...
$27.85
In Stock
Order within the next 4 hrs and your part ships today!
Questions And Answers for FPRU19F8RFC
Ask our experts a question about this model and we'll get back to you as soon as possible!
8 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dan
January 20, 2024
My fridge temperature is set at 36 degree's, but my thermometer I placed inside says 26 degrees, which is freezing my vegetables and salads and leaving a ice coating on other foods.The fridge runs often and doesn’t shut off. This started out as intermittent and now it’s all the time. I was thinking it is the thermometer?? Any idea’s. Thanks
For model number FPRU19F8RFC
Hi Dan, thank you for contacting us. Based on our understanding, the issue is most probably with the temperature sensor, part number PS1527511. It senses the temperature inside the refrigerator and sends information to the electronic control. You may need to replace it to fix the issue. We hope this solves your problem!
Hello Guevara, thank you for writing. There are several things that can set off the alarm. A fridge will start beeping when it is either too cold or too warm. or, Nudging the doors closed or removing any items that may be impeding its closure can stop the beeping immediately. If your fridge does not have an auto-defrost function then excessive ice-build up in the freezer can cause the beeping alarm. Good luck and have a great day.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Bower
March 15, 2025
Is a replacement for the top drawer available? The front broke off of ours.
For model number FPRU19F8RFC
Hi Bower, Thank you for asking. The top drawer for this model is listed as PS10064644. Thank you for the inquiry, good luck with the repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Maurizio
September 25, 2025
the temperature display is not accurate
For model number FPRU19F8RFC
Hello Maurizio, thank you for getting in touch. If your refrigerator temperature is not accurate, the temperature sensor, part number PS1527511, could be faulty. A faulty temperature sensor could send an incorrect temperature reading to the control panel or display. We hope this helps.
I have the full fridge with no freezer. the display is staying at a constant 4deg but if you put a bowl of water or glass in the fridge it causes all the vegetables to freeze and ice to form on the water. cleaned the coils, opened the door to get the compressor to run then ran the temp control up and it turned off. not sure what to try next.
For model number FPRU19F8RFC
Hello Jason, thank you for reaching out. According to our research, the issue is probably with the temperature sensor, part number PS1527511. It senses the temperature inside the refrigerator and sends information to the electronic control. If replacing the temperature sensor does not help, we would recommend replacing the defrost heater, part number PS426768. If you need help placing an order for it, please feel free to give us a call. We look forward to hearing from you!
Turned freezer off at themostat and unplugged freezer. Removed 2 screws at front 2 at the back and 2 at the top. Lowered top cover and removed evaporator fan bracket (2 more screws) removed themostat capulary tube( 1 screw and bracket) then unplug fan motor. Removed motor from bracket (2 screws). Put on new fan motor then removed fan blade from old motor and put on the new motor. Remounted fan motor bracket and thermostat capulary tube. Remounted top cover, plugged freezer in the set the thermostat to 4 and freezer is working fine and doing its job. I orderedmotor on a Sunday and it was shipped on Monday and I received said part at 7:pm on Wednesday.
Removed evap cover from Commercial Refrigerator. Removed mounting screws from Evap motor mount. Replaced evap fan motor. Repositioned. Reinstalled evap cover. Tested . This motor was hard to find locally. Glad I called.
