The relay switch may also be known as the door micro switch and is a part for your microwave. The function of this part is to monitor the door latch and communicate whether the door latch is open or c...
Ask our experts a question about this model and we'll get back to you as soon as possible!
6 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kelly
January 20, 2020
Display won’t light up
For model number FPMO209RFA
Hello Kelly, thank you for your question. If the display is not lighting up, the power board should be replaced, which is Part #: PS11728388. Good luck with your repair.
The lights on my microwave control panel do not come on but everything else works. Please help. Thank you in advance.
For model number FPMO209RFA
Hello JC, Thank you for the question. The light int he board is only sold as part of the Control Board, PartSelect Number PS11728388 assembly. We hope this helps.
Hello Bill, Thank you for the question. The Light for the controls is only sold as part of the Control Board, PartSelect Number PS11728388. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
The microwave works perfect except there is no display
For model number FPMO209RFA
Hello Bill, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11728388. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
The display on my microwave has become very dim. It is just fading. You can hardly see it. The microwave works fine. Is it just a display issue?
For model number FPMO209RFA
Hi David, thank you for contacting us. We have researched and found that a faulty electrolytic capacitor on the control board causes the problem of a dim display in the microwave. So, you may need to replace the control board, part number PS11728388, to resolve the issue. We hope this helps, good luck with the repair!
I first removed the top plate above the microwave door (3 screws), then I removed the plate containing the buttons and clock. The microwave has 3 relay switches and they are in a little holder. The holder was too difficult to remove so I just removed the bottom switch and replaced. The microwave started right up.
Removed the 3 screws to drop the lower panel and, removeed the turn table plate and ring. Then removed the 2 screws holding the motor, the 2 wires attached to the motor and removed the old motor.Replaced the new motor in the reverse order. DO NOT FORGET TO UNPLUG THE MICROWAVE FIRST.
was told buy a repair person to check the door micro switches as it was a common problem. removed the top plastic air grill to get access to the screw that holds in place the control cover. After unplugging the unit, i took out the (2) screws that held in the switches and removed them (3). One switch was a bit melted so i tested it with a 12 volt battery and it was bad. Ordered a new one from Part select and got it fast . Works great .