This manufacturer-approved air filter system for refrigerators eliminates odors and any impurities. It does this by neutralizing and removing odor-causing molecules. For best results, it is important ...
This genuine PureSource Ultra water filter will fit most Frigidaire french door and side by side refrigerators. You will find this filter located in the back, top right of the appliance. It is white i...
This crisper cover front support is used to keep the crisper shelf in place and may need replacing if the door will not open or close. This white, OEM part measures roughly 1 inch in diameter and can ...
This authentic rear crisper support is a white, plastic part which is rated as "easy" to install by our customers. This OEM part replaces the rear crisper cover support in your fridge and mounts to th...
Need more organized space in your fridge door? This clear plastic shelf bin is perfect for storing 2-liter bottles, condiments, and other everyday items. It installs easily—just snap it into place, no...
This part releases water from the supply line when it's activated. NOTE: This part may appear different than the original, but is an authorized manufacturer replacement.
Need more space on your fridge door? This clear shelf bin is perfect for storing bottles and jars. It’s easy to install—just snap it into place, no tools needed. It fits many Frigidaire, Kenmore, and ...
Need a new frame for your fridge’s crisper drawer? This one supports the drawer and holds the shelf on top—just note that the glass isn’t included. It’s got raised edges to help catch spills and keep ...
The run capacitor is attached to the compressor. This part is 120 volts and 15 mfd. The run capacitor helps the compressor kick on and off while maintaining a constant temperature to keep things froze...
This is the replacement water filter base for your refrigerator. It is approximately 3-1/2 inches by 3 inches. It is made of white plastic with two blue water filter receptacles. The water filter base...
This dairy door, also known as a dairy bin cover, is a genuine OEM replacement part for your refrigerator. The dairy cover is a plastic part that serves as a covering to a shelf on your fridge door, t...
$95.61
In Stock
Questions And Answers for FGSS2335TF7
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Diane
August 8, 2023
I need to replace filters
For model number FGSS2335TF7
Hello Diane, thank you for asking. The water filter that fits in your model is part number PS2364646, and the air filter that is compatible with your model is part number PS1993820. We hope this helps!
What parts numbers are the middle and bottom crisper bins
For model number FGSS2335TF7
Hi Steve, thank you for contacting us. The part number for the middle crisper drawer is PS2361219, and the part number for the lower crisper drawer is PS430065. We hope this information is useful!
On the front panel the water light button no longer lights up and will not dispense water. The ice buttons still work and the controller buttons still work. What needs to be done to fix this?
For model number FGSS2335TF7
Hi David,
Thank you for your question. If the water light button no longer works and you are unable to dispense water, you will need to replace the control assembly, part number PS12365206. We hope this helps!
In my specific appliance the water valve is located in the bottom right hand corner looking at it from the back. To get to it I remove the thin layer of cardboard the covers the back of the fridge. I then proceeded to disconnect the 1/4" copper tubing which is the water feed coming out of the wall. Then I removed the screws that hold the valve assembly in place. I took the water valve out and removed the electrical connections as well as the plastic tubing which feed the water dispenser and the ice maker. To install the new water valve it was just a matter of reversing steps.
Even though my wife said that our icemaker broke, there was actually nothing wrong with it. It was the valve that let water flow in during the 'harvest' cycle. A real easy way to test the icemaker without voltage and current measurements, is to fill the tray by hand with a little cup of water; wait till the water freezes and see if the maker dumped the ice into the bin.
Used pliers to remove the residual broken stud that was still attached to the wall of the refrigerator, and then just pushed the new part in place. The longest time was spent in removing the food and crisper drawers.
