Sold individually. Product Description Charcoal air filter works with some Frigidaire, Electrolux, White Westinghouse, and Tappan models of microwaves. This is a genuine OEM part that works for some m...
Sold individually. This grease filter is for microwaves.
Grease filter traps grease from the exhaust air.
Follow the instructions in the owner's manual when installing this part.
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Debbie
October 30, 2023
No power though plugged into working ooutlet
For model number FGMV155CTFC
Hi Debbie, thank you for your inquiry. If your microwave does not have power, the most likely cause of this issue is a blown fuse, part number PS12071294, which may need to be replaced. We hope this solves your problem!
How do I replace the door handle? how does the door disassemble?
For model number FGMV155CTFC
Hi Ken, thank you for reaching out. Here are some general instructions that will help you replace the door handle. First, remove the vent grill by removing the top screws. Lift the door to remove it. Use a putty knife to remove the inner trim. Then, remove the inner screws to remove the inner door assembly. Use a flat screwdriver to separate the inner door assembly from the outer door panel. Then, unthread the screws securing the door handle and replace the door handle. We hope this helps!
Was this helpful?
Thank you for voting!
Laura
May 25, 2023
the handle fell off, how do I put it back on
For model number FGMV155CTFC
Hello Laura, thank you for reaching out. We have found some relevant instructions for replacing the door handle, part number PS12071383. You may follow the following steps:
1. Unplug the power cord or shut off the power supply.
2. Open the door and use a Phillips-head screwdriver to unthread the two screws securing the front vent. Use a putty knife to help pry off the vent.
3. Lift off the door and set it down on a towel or blanket. Use a putty knife to help detach the inner door trim.
4. Unthread the four screws securing the inner door assembly. Use a large flat-head screwdriver to help separate the inner door assembly from the outer door panel.
5. Now unthread the two mounting screws to release the old handle.
6. Follow the same step backward and install the new door handle.
We hope this solves your problem!
The convection goes on but does not heat what’s the problem?
For model number FGMV155CTFC
Hello Mordechai, thank you for the question. If your microwave is not heating, it seems that the issue is most likely with diode. You may need to check the diode. If it is faulty, you may need to replace the diode, part number PS12071314. We hope this information helps!
Remove vent cover then remove touch screen control panel. When you remove control panel take photo of where everything is plugged in then unplug and remove control panel. 3 door switches located next to door in a plastic chassis. Test each switch with current tester. Remove the bad switch and replace with the new one. You tube DIY helped.
First thing I dir was search YouTube for any related videos and found this one https://www.youtube.com/watch?v=uHj4H9Fdxrc, it was the exact problem my microwave was exhibiting. Once I verified the problem by troubleshooting, I removed the part and verified that the switches were working fine, the door latch assembly showed signs of wear which was the cause of the problem. After receiving the replacement part I installed it, verified that power was restored to the unit and reassembled the microwave, works fine, hope it lasts a long time!
