The relay switch may also be known as the door micro switch and is a part for your microwave. The function of this part is to monitor the door latch and communicate whether the door latch is open or c...
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ryan
November 30, 2022
Built-in microwave will automatically turn on when the door shuts (when we are done reheating something), timer will sometimes fail to countdown, it will start to reheat/timer will countdown and then the microwave will randomly shut off, and there are times it acts like it’s not reheating (but is running).
For model number FGMO205KFB
Hello Ryan, thank you for the question. According to our research, it seems the Control Board is faulty and you may need to replace it, the part number is PS2369251. If you need help placing an order for it, please feel free to give us a call. We look forward to hearing from you!
It keeps blowing my fuse. What would cause that to happen? Fuse inside the unit. I put a new one in and it blows out. Could it be a bad capacitor or something else? I can put a new fuse in and plug it in the light inside powers up but as soon I hit start it blows my fuse.
For model number FGMO205KFB
Hello Randy, thank you for your inquiry. Based on our understanding of the issue, we would suggest checking the noise filter, part number PS8747022, to solve the problem. We hope that helps!
Need to replace glass plate. What size size of plate should I order.
For model number FGMO205KFB
Hi Kim,
Thank you for your question. The part number listed under your model number for the glass plate is PS16620620. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
I first removed the top plate above the microwave door (3 screws), then I removed the plate containing the buttons and clock. The microwave has 3 relay switches and they are in a little holder. The holder was too difficult to remove so I just removed the bottom switch and replaced. The microwave started right up.
was told buy a repair person to check the door micro switches as it was a common problem. removed the top plastic air grill to get access to the screw that holds in place the control cover. After unplugging the unit, i took out the (2) screws that held in the switches and removed them (3). One switch was a bit melted so i tested it with a 12 volt battery and it was bad. Ordered a new one from Part select and got it fast . Works great .
After unplugging the unit remove the control face buy removing the screws. All three door switchs are on a bracket on the left. Remove the two screws holding the bracket in place and pull out. Disconnect the wires from the three switches and test each switch indivually to determine the bad one. I used a multimeter set on ohms.Replace the bad switch with the new one and replace all the wires. Reassemble the unit and you are good to go.
