This manufacturer-approved air filter system for refrigerators eliminates odors and any impurities. It does this by neutralizing and removing odor-causing molecules. For best results, it is important ...
This genuine PureSource Ultra water filter will fit most Frigidaire french door and side by side refrigerators. You will find this filter located in the back, top right of the appliance. It is white i...
This part releases water from the supply line when it's activated. NOTE: This part may appear different than the original, but is an authorized manufacturer replacement.
This GREY magnetic door gasket is designed to help your 36-inch French-door refrigerator maintain a consistent internal temperature by forming a tight seal between the doors and the cabinet. Made from...
This screw is used in refrigerators. The screw can be loosened or tightened with a Phillips-head or square-head screwdriver. This screw is used to secure the refrigerator handle to the refrigerator do...
Ensure your freezer operates efficiently with this replacement drawer gasket, designed to form a tight seal that keeps cold air in and warm air out. Made in light gray and compatible with select model...
This mullion hinge pin is designed to secure the mullion in place within compatible refrigerator models, allowing it to pivot smoothly as the doors open and close. Measuring approximately 1.5 inches b...
This is the replacement water filter base for your refrigerator. It is approximately 3-1/2 inches by 3 inches. It is made of white plastic with two blue water filter receptacles. The water filter base...
This small but important part helps your fridge defrost safely. It keeps an eye on the temperature of the coils and shuts off the heater when things get warm enough. That way, your fridge doesn’t over...
This genuine OEM evaporator fan motor is essential for maintaining consistent cooling inside your refrigerator by circulating cold air over the evaporator coils and distributing it throughout the fres...
$149.71
In Stock
Questions And Answers for FGHN2866PF1
Ask our experts a question about this model and we'll get back to you as soon as possible!
7 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Richard
April 22, 2022
Where is the defrost timer located on the above mentioned model ? Thanks!
For model number FGHN2866PF1
Hello Richard, thank you for your question. Electronic control board PS7321314 manages the functions of the refrigerator such as cooling and defrost times. This board is shown as item 50 on the schematic Cooling System. We hope this helps. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Katherine
April 12, 2023
The freezer is working however the refrigerator part is not keeping cold
For model number FGHN2866PF1
Hello Katherine, thank you for contacting us. To fix the issue, you may need to check the damper control assembly, part number PS899531. It controls the cold airflow from the freezer compartment into the refrigerator compartment. We hope this helps, good luck with this repair!
I have installed a new evaporator fan motor. I worked for about 1 month. Freezer compartment is now cold and the fridge section is showing 70F degrees . How can I check the evaporator fan motor
to see why it does not run. Resetting defaults doesn't work.
For model number FGHN2866PF1
Hello Ken, thank you for your inquiry. Based on the description that you have provided, we would recommend checking the evaporator fan motor, part number PS1526073, to solve the problem. You can test the motor for continuity using a multimeter. We hope this helps.
Error for high temperature, from what I see in the back the fan it is not turning, it is like does not have power coming to it, seems to be turning though, I have seen it turning for a bit and then stopped. But also the compressor is not doing anything... I hear no noises, you know like when is making cold air...
So, I am not sure what my problem is. Can you help?
Thank you,
For model number FGHN2866PF1
Hi Johnny, thank you for getting in touch. Based on our understanding of the issue, we would suggest replacing the control board, part number PS7321314, to solve the problem. Glad to be of assistance!
The display on the door for both the freezer and the fridge saying OF, and the fridge isn’t coming on, please advise what can be the issue here?
For model number FGHN2866PF1
Hi John, Thank you for reaching out. The F0 indicates a stuck key error. You can try to unplug the appliance and rub your fingers across the keys over and over to warm up the keypad and release the stuck key. Let it cool down and plug the fridge back in to see if the error resets. We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
In my specific appliance the water valve is located in the bottom right hand corner looking at it from the back. To get to it I remove the thin layer of cardboard the covers the back of the fridge. I then proceeded to disconnect the 1/4" copper tubing which is the water feed coming out of the wall. Then I removed the screws that hold the valve assembly in place. I took the water valve out and removed the electrical connections as well as the plastic tubing which feed the water dispenser and the ice maker. To install the new water valve it was just a matter of reversing steps.
Even though my wife said that our icemaker broke, there was actually nothing wrong with it. It was the valve that let water flow in during the 'harvest' cycle. A real easy way to test the icemaker without voltage and current measurements, is to fill the tray by hand with a little cup of water; wait till the water freezes and see if the maker dumped the ice into the bin.
pulled fridge from wall, removed card board cover, unplug the fridge. turn the water off to the fridge. remove the water source from fridge first then remove 2 screws that hold the valve. then the wire plugs. hoses.. they were color coded.
