The temperature sensor, also known as an oven probe, detects the temperature within the oven cavity. This temperature sensor is 9 inches in length and is a genuine OEM part. If your oven is too hot, n...
This 40-watt appliance light bulb is a reliable replacement for use in select ranges, refrigerators, freezers, and microwaves. It provides bright, consistent lighting to help you see clearly inside yo...
This is a replacement rack for your oven. The oven rack fits into grooves on the side of the oven wall, and acts as a shelf that you can place food items on when you want to cook them in the oven. Thi...
Struggling with a sticky, stubborn stove drawer? Our Frigidaire Range Front Drawer Glide is here to restore the easy glide of your cooker's storage or broil drawer. Produced as an authentic OEM part, ...
Sold Individually. These legs should be adjusted to make your appliance level on uneven flooring.
$16.43
In Stock
Questions And Answers for FGGF3035RFA
Ask our experts a question about this model and we'll get back to you as soon as possible!
9 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Nancy
May 17, 2023
Hello, I washed the knobs for my washer and silver film came off. I would to know if you will provide another set of knobs or I need to buy these low quality knobs. Thank you
For model number FGGF3035RFA
Hello Nancy, Thank you for writing. The Model number provided is for a range. The Knobs for the range are listed as PartSelect Number PS11724147. We hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Ann
October 19, 2023
Need to get replacement knob
For model number FGGF3035RFA
Hello Ann, thank you for the question. The control knob you are looking for is part number PS11724147. Glad to be of help!
Oven igniter prevents comes on for one min then cuts off then comes back on and dose the same thing
For model number FGGF3035RFA
Hello Donald, thank you for writing. If your burner lights for a short time but then goes out, you may have a blockage in the gas valve part PartSelect Number PS5136194. Good luck with your repair.
my oven didn't heat at all what part do i need to change
For model number FGGF3035RFA
Hi Joe, thank you for reaching out. We believe that the issue is most likely with the oven temperature sensor, part number PS1528542. Before replacing it, we would suggest checking the heating element for continuity to ensure it is not faulty. We hope this solves your problem!
I called a repair place. They charged $54 to diagnose, (said it needed a new latch motor) then wanted $220 to complete the repair. I checked online prices and did it myself for about 15 minutes work and the latch motor itself ($44?).
Was necessary to uplug the range, pull it away from the wall and remove the back panel sheet metal, then 3 screws that mount the motor. Replace motor, reattach sheet metal. Plug in. Done. Ready to bake cookies.
Turned power off at electrical panel. Pulled oven away from wall. Removed back cover (6 screws), then unplugged wires from old receptacle. I had to pull the squeeze clips backwards & break them to remove the old receptacle - couldn't squeeze them enough to remove them otherwise. The old receptacle came out through the inside of the oven, and the new one snapped in easily from inside the oven as well. Replaced wiring, installed new bulb, restored power & tested. Replaced back cover. Good time to vacuum under/behind where the oven usually lives before sliding it back to the wall.
Repair was quite easy, as long as you have the instructions for removing the door. The screws that hold the bottom of the door to the fixed hinge are placed into the side of the hinge assembly after removal; this holds the door at a 45 degree angle for easy removal. After that, just place the door on a flat surface and dismantle the door from the inside. The inner glass is contained in a metal frame with another piece of glass; this frame comes apart easily using the clips in each side. The door assembles easily after the glass is replaced; just take your time and give yourself enough room to lay out the parts as you go. Good luck!
