This oven temperature sensor, also known as an oven probe, monitors the internal temperature of the oven cavity to ensure accurate and consistent heating. Measuring 6 inches in length and made of dura...
This hidden bake element is an essential heating component located beneath the oven floor panel, providing consistent heat for baking, roasting, and warming. Designed with a durable ceramic sheath to ...
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kathryn
December 2, 2023
The oven is set for example at 350 but the temperature is 325 in the oven 25 degrees less than setting. Is it the thermastat sensor?
For model number FGET3065PFC
Hi Kathryn, thank you for getting in touch. Yes, the most likely cause of this issue is a faulty temperature sensor, part number PS16745361, which may need to be replaced. We hope this sorts out your problem!
Hello, a problem with the upper oven. The convection fan starts and the screen displays a rotating fan icon in a square. Only the broil element works continuously without stopping. The cooking and convection elements do not work and no other indication appears on the square screen. The bottom oven works very well.
What parts do you suggest i order ?
Thank you and have a good day.
Christian
For model number FGET3065PFC
Hello Christian, thank you for contacting us. Based on the description that you have provided, we would recommend replacing the control board, part number PS12364485, to fix the issue. We hope this solves your problem!
When we turn on the back left induction stove often the numbers on the control flash erratically, makes a grinding noise, the burner comes on for a minute and then the display says ER and shuts off. Also, separately, if I put a POT on the front left burner without it being on, sometimes the stove beeps and the front controls display flashes.
For model number FGET3065PFC
Hi Mike,
Thank you for your question. If the wall oven is acting erratically, try resetting it by cutting the power to it. If this does not resolve the issue, the electronic control board will need to be replaced. The part number listed under your model number for the electronic control board is PS12364485. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
PF alarm appeared on display. Noticed clicking when cord was moved. Had arced for some time and melted original block. New part slightly different. Only has 3 lugs, old one had six. Stack using washers provided. Take note of colors before disassembly. Use caution while working through access opening. The edges are sharp. Only tools needed are phillips screwdriver, deep socket for lug nuts. Nut driver optional. Hope this is helpful.
Repair was quite easy, as long as you have the instructions for removing the door. The screws that hold the bottom of the door to the fixed hinge are placed into the side of the hinge assembly after removal; this holds the door at a 45 degree angle for easy removal. After that, just place the door on a flat surface and dismantle the door from the inside. The inner glass is contained in a metal frame with another piece of glass; this frame comes apart easily using the clips in each side. The door assembles easily after the glass is replaced; just take your time and give yourself enough room to lay out the parts as you go. Good luck!
Had to reference original owner's manual for instruction(s) on how to remove oven door. Used several "YouTube" videos to reference oven door design (Oven door glass is actually several layers of glass.) After completing about 30 mins of research and finding the right square drive bit, the repair went smoothly and without complications. The biggest challenge was researching and understanding what part(s) were needed and how to replace them. It seemed liked a lot of work doing the research however it sure beat a $350 repair bill. It cost me $90 and about 1 1/2 hours of total time. Oven works better than ever, thanks parts select for the part(s) and diagram(s) ...
